Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ useing oil?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 53
Joined: Sat Jul 19, 2003 9:53 am
Location: QLD

MQ useing oil?

Post by drive it »

I'v just changed my oil to penrite light truck oil, 3000km ago it was not useing oil befor then and it has started to use quite alot of oil i have put about 2 to 3 litres in. since. dose any one have any ideas of y this is happening? Its a MQ SD33 81 modle hade a complete rebuild about
30 to 40 thousand KM ago.
GUTS ARE GOOD, BALLS ARE BETTER
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

is there a "weight" differance between the Penrite and the previous band you were using ??? ie: 20W10 versus 20W40

A change in the oil weight seems the most likely cause and simply changing back may solve the problem, why did you change anyway ???

similar thing explained here .....

http://www.outerlimits4x4.com/PHP_Modul ... highlight=


Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 9
Joined: Fri Nov 28, 2003 1:29 pm
Location: NE VIC

Post by pigdriver »

i know a bloke changed his diesel patrol over to pennzoil and he nipped up a cylinder and had to replace the sleeve.
I know the plural of anecdote is not evidence but i wouldnt run anything that the USA reckons is great.
flying is easy, just throw your self at the ground and miss
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

If u would like to know my opinion about Penzoil............... It really is an inspecific recycled oil.
they say that multipurpose oil is for deisels and petrols etc. of all types sizes and uses. It is not possible to make an oil that is really good for a task such as this. They just recycle and filter all your old oil and make a ruff guess as to the wieght and put some chemicals in it to make it run nicely.

The other thing is, if ur car blows white when it starts ( probably ) it is using a little oil here but nothin like wat u speak of.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 53
Joined: Sat Jul 19, 2003 9:53 am
Location: QLD

Post by drive it »

i dont know what sort of oil was in it. it was in there when i brought it.

i think the old stuff was in there for quite a while. so i guess it was pritty thick.
GUTS ARE GOOD, BALLS ARE BETTER
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Still havent stated what the oils "weight " is ?????
IE:
10w20
20w40
20w50
etc etc etc etc , should be on the front of the bottle !

Any chance of contacting the previous owner and seeing what oil they used ?

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 109
Joined: Sun Apr 04, 2004 8:49 pm
Location: SYDNEY

Oil Usage

Post by giffo »

i too have a MQ diesel and it is using a bit of oil.
What is the best oil to use. Also differant coloured smoke means what????
How often should an oil change (inc. filters) be changed.
What additives can be used to improve the life of an old girl.

Cheers

Giffo
Life is not a bowl full of Cherries!!
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

For the diesel engine i prefer Castrol Super RX, or HPR diesel.
every 5000kms for all filters except air and that can be every 10 000km's.
Blue means burning oil
Black means running too rich ( too much fuel getting into the cylenders )
white means burning raw fuel ( left over in cylenders after turn off, it will do this when u first start it on a cold morning as the injectors in a SD33 commonly drip a little after its killed ).

The only aditive i have found to actually work personally is the really thick engine stop smoke. It works!!!

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 109
Joined: Sun Apr 04, 2004 8:49 pm
Location: SYDNEY

"Oils ain't oils"

Post by giffo »

Thanks Screwy,
You are a man of much knowledge!!

Giffo
Life is not a bowl full of Cherries!!
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

could be that the oil is cleaning the motor too much (see my recent post). The Castrol dealer told me that a CI rated oil can cause older motors to start using oil due to the cleaning effect. (I'm not sure how this works)

What was the rating of the oil you used?
Posts: 53
Joined: Sat Jul 19, 2003 9:53 am
Location: QLD

Post by drive it »

Thats what I was told when i rang up an asked about it, that it could be just cleaning the old stuff out.
but its hade to see how i would have to put 4 to 5L in if its just cleaning the engine.
and now its starting to blow smoke which it did'nt do befor the oil change?
GUTS ARE GOOD, BALLS ARE BETTER
Posts: 109
Joined: Sun Apr 04, 2004 8:49 pm
Location: SYDNEY

Oils debate

Post by giffo »

I think you guys are right about the new oils cleaning engine out. I spoke to an oil engineer from the mining industry (analyses oils in crusher etc) he said old engines run better on prehistoric oils. New oils are made for new engines with differant runnings etc.
Sounds good to me. At least I now think my motor is OK.

Giffo
Life is not a bowl full of Cherries!!
Post Reply

Who is online

Users browsing this forum: No registered users and 116 guests