nissan glass stuff gq and gu

Post by **Carl Coight** » Tue Jan 28, 2003 7:16 am

Put me down for 2.

Post by **Bush65** » Tue Jan 28, 2003 6:32 pm

Hayden, sort of hi-jacking your thread, sorry!

My rig has a glass bonnet and I am in the process of swapping in a turbo diesel - none of it is standard (or Nissan!!!). My reason for asking here is that I was sure this issue would have been addressed and the answers would also benefit others contemplating a glass bommet.

Post by **ALPINE-OFF-ROAD** » Tue Jan 28, 2003 8:18 pm

well to tell you the truth it hasnt realy been brought up before
but heat can be an issue i have 1 of my bonnets on my truck and its mate blk so with the sun and under bonnet heat it gets hot and it also gets a little flexi but its ok it wont hurt it

how close is your turbos to the bonnet now ?????? are you peeling the paint of now?????

Post by **MKPatrolGuy** » Tue Jan 28, 2003 8:59 pm

ALPINE-OFF-ROAD wrote:well to tell you the truth it hasnt realy been brought up before
but heat can be an issue i have 1 of my bonnets on my truck and its mate blk so with the sun and under bonnet heat it gets hot and it also gets a little flexi but its ok it wont hurt it

how close is your turbos to the bonnet now ?????? are you peeling the paint of now?????

Ahh, the summer bonnet

Post by **ALPINE-OFF-ROAD** » Wed Jan 29, 2003 2:47 am

lol lol llol the sunday 30 mins before the drive booty fab sommer bonnet lol lol it works dammmmm good they are fairly big vents lol lol lol the muddy water spray out the vent

Post by **Ryan** » Wed Jan 29, 2003 6:03 pm

hayden will the rock doors fit an mq?? im guessing they do cause gq doors fit?? or am i wrong? just wondering cause if they do id be after a set shortly

Post by **ALPINE-OFF-ROAD** » Wed Jan 29, 2003 11:15 pm

hay ryan they should fit coz as you said they are the same and as far as i know they are anyways

well they are still a little way of as i am finishing the gard molds and then will be straight onto the rock doors

i will hurry up and get them done asap

Post by **Bush65** » Fri Jan 31, 2003 8:12 am

ALPINE-OFF-ROAD wrote:well to tell you the truth it hasnt realy been brought up before
but heat can be an issue i have 1 of my bonnets on my truck and its mate blk so with the sun and under bonnet heat it gets hot and it also gets a little flexi but its ok it wont hurt it

how close is your turbos to the bonnet now ?????? are you peeling the paint of now?????

Distance from top of turbo housing to underside of bonnet is between 100mm and 115mm. There wasn't any heat shield fitted to the turbo!

Bonnet is gelcoat not paint on outside, black flowcoat inside and engine swap isn't finished yet, so no idea what it will be like.

Post by **ALPINE-OFF-ROAD** » Fri Jan 31, 2003 1:38 pm

hay jhon

well it should be ok you have a good air space in between
i think if it was me i would be making up a heat sheild tho
maybe out of some stainless sheet just in case
better to do that before than scorch the glass

Post by **Bush65** » Fri Jan 31, 2003 2:21 pm

Thanks for that Hayden. I will add some insulation as well as the shield.

Post by **ALPINE-OFF-ROAD** » Fri Jan 31, 2003 3:23 pm

hay jhon

there is this stuff i have seen that is a thurmal barrier used in race cars alot it a sliver foil like stuff that sticks on i dont know what its called or where you will get it but its good stuff

maybe try a race shop like revolution race gear maybe ?
i will see what i can find as i would like to know myself

Post by **ALPINE-OFF-ROAD** » Fri Jan 31, 2003 3:30 pm

jhon

just spoke to the guys at revaloution melb and they have this sheet its $$$
like 189 a sheet that is 40 inches by 36 inched you might not need that much let me know if you want it and i might go halfs with ya or

Post by **bj on roids** » Fri Jan 31, 2003 3:47 pm

hayden...are you making seats?

Post by **ALPINE-OFF-ROAD** » Fri Jan 31, 2003 4:13 pm

hay bj

arrrrrrr yerp i will be makin seats soon
would you want it trimed or just a glas seat
the 1 i was looking at molding are realy to be trimed or at least padded
depends on what you want

Post by **bj on roids** » Fri Jan 31, 2003 4:31 pm

they HAVE to be?

can we get like a elastic vinyl cover and throw some padding through it?

seatbelt holes?

any pics?

ill need the "skinny bastard" version :roll:

Post by **ALPINE-OFF-ROAD** » Fri Jan 31, 2003 9:49 pm

wellllll at the momment they are only avaliable in a fat basted racin version you need to eat heathy and then it will fit ya

so what time did you speak to carlton
say after lunch

will look into the skinny prick racin version

Post by **Carl Coight** » Thu Feb 06, 2003 7:33 am

How is the glass stuff comming along?
I would like to see some pics on the bonnet with the vents and also the guards?

Post by **Bris_GU** » Thu Feb 06, 2003 10:47 am

Hayden

That should be the small prick version not the skinny prick version.

Ian

Post by **bj on roids** » Thu Feb 06, 2003 11:27 am

Bris_GU wrote:Hayden

That should be the small prick version not the skinny prick version.

Ian

no you are getting yourself and me mixed up again :finger:

Post by **ALPINE-OFF-ROAD** » Fri Feb 07, 2003 8:09 pm

hay how are we all

well i should have some pics afer the weekend
and all is comming along nicely

Post by **Hoonz** » Fri Feb 14, 2003 6:28 pm

still waiting for pics :p :drinking:

Post by **damige** » Sun Mar 02, 2003 7:45 pm

Hi everyone ,im new to this forum and would like to know if these glass bonnets for the gq are avaliable yet??
damige

Post by **ALPINE-OFF-ROAD** » Sun Mar 02, 2003 10:31 pm

yes they sure are avaliable ............................
now have a few made ready to go
with bonnet pins also avaliable

still tryin ti get my mates digi camra to snap a few pics of the bonnrts, gards and rock doors and soon a rear tail gate section fo gq cut down utes

Post by **ALPINE-OFF-ROAD** » Wed Mar 05, 2003 2:04 am

mmmmmmmmmm

Post by A1 » Wed Mar 12, 2003 9:53 pm

Hey Hayden

got that digi happenin yet really keen to check out these front guards would like a set with larger arch to fit new wheels...

Cheers Dan

Post by **ALPINE-OFF-ROAD** » Wed Mar 12, 2003 10:33 pm

hay mate

yep they are looking good chezzy will soon have a set on his rig and yerp yhe lager arch is a piece of cake have pics of the bonnets but nun as yet of the gards there coming i cant seen to get the pics up on here but can email them

Post by **Wendle** » Thu Mar 13, 2003 7:25 am

Mail them to me!

Post by JK » Thu Mar 13, 2003 8:10 am

And me.

Post by **Hoonz** » Thu Mar 13, 2003 8:18 am

I'll have pics too!!!

Post by **MKPatrolGuy** » Thu Mar 13, 2003 12:47 pm

Me too

Outer Limits 4x4 Board

nissan glass stuff gq and gu

FIBERGLASS GARDS

Re: FIBERGLASS GARDS

FIBERGLASS GARDS

Re: FIBERGLASS GARDS

Any pics yet?

Who is online