Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Temp sender on a G16B (16 valve EFI)

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Temp sender on a G16B (16 valve EFI)

Post by Damo »

I am trying to figure out why my temp guage is not working, does anyone know where there sender unit is located?
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Normally in the inlet manifold near the thermostat housing, from memory has a yellow wire.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

on mine its located right next to the thermostat housing. its a plastic clip that slides onto a metal tag that is then screwed into the housing. i had to replace mine a few months ago because the metal tag had fatigued and snapped.

iirc was about $40 from suzuki genuine
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Thanks dudes

Feel the love :D
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Damo, when you get really annoyed with it - just send the motor down to me - i'll dispose of it for you ;)
DMA Founding Member #1 - Now Retired
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

greg wrote:Damo, when you get really annoyed with it - just send the motor down to me - i'll dispose of it for you ;)


Is this secret squirell stuff ??
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

love_mud wrote:
greg wrote:Damo, when you get really annoyed with it - just send the motor down to me - i'll dispose of it for you ;)


Is this secret squirell stuff ??


I don't know - did damo ask you for my postal address? maybe he's going to surprise me with a little gift for my birthday :D
DMA Founding Member #1 - Now Retired
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

greg wrote:
love_mud wrote:
greg wrote:Damo, when you get really annoyed with it - just send the motor down to me - i'll dispose of it for you ;)


Is this secret squirell stuff ??


I don't know - did damo ask you for my postal address? maybe he's going to surprise me with a little gift for my birthday :D


A parcel bomb ???

Nah .. why are you after a 16v 1.6 ???
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

love_mud wrote:Nah .. why are you after a 16v 1.6 ???


I think i'll be taking the 5th on that one love_mud :roll:
DMA Founding Member #1 - Now Retired
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Sorry .. we are in Aus .. no 5th ammendment ..


SPILL IT :x


:D
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

The 4th perhaps?
DMA Founding Member #1 - Now Retired
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

greg's finally realised there's no replacement for displacement :finger:
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

gerg, do you want the 2" stainless mandrel exhaust and titanium muffler too? :D

love_mud, keep drilling him, he'll spill the beans eventually

aant, we told him so :P you got a spare seat for Ormeau on Sunday?
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Damo wrote:gerg, do you want the 2" stainless mandrel exhaust and titanium muffler too? :D

love_mud, keep drilling him, he'll spill the beans eventually

aant, we told him so :P you got a spare seat for Ormeau on Sunday?


Looks like he has eaten that exhaust, but it has a particularly effective silencer built into it...

mmm 16v 1.6 :cool: ... torque below 5,000,000 rpm ... :finger: :D
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

antt wrote:greg's finally realised there's no replacement for displacement :finger:


The lesson i am learning is a little bit different to that one. However, i guess what you are saying is similar to the "a vitara is no replacement for a sierra" rule of thumb too i guess :?
DMA Founding Member #1 - Now Retired
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

greg wrote:
antt wrote:greg's finally realised there's no replacement for displacement :finger:


The lesson i am learning is a little bit different to that one. However, i guess what you are saying is similar to the "a vitara is no replacement for a sierra" rule of thumb too i guess :?


Fight, fight, fight!! :D
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Damo wrote:Fight, fight, fight!! :D


I don't know why you're chirping up Damo... Any car that drives under it's own power would outdrive your car :roll:
DMA Founding Member #1 - Now Retired
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests