Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Body Lift 2dr & 4dr

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Body Lift 2dr & 4dr

Post by GRIMACE »

Hey guys/girls

Is there any differences in the kits for the two door or four door rangies ? ? ?
Reason bein is I might get that 2" body lift off jeremy but not sure if i can use the 2dr body lift on mine :D


Cheers
Anthony
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

Seat belt mounts are the only thing i can think of, they wont be in the kit.

The spacers I believe are the same.
Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

thanks


is there an easy way to whip up seatbelt mounts :)
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

Extend seat belt mounts:

2 options:

A: cut existint bolt and extend with tube. (not the best)
B: use 25mmx3mm flat drill 2 holes into at 50mm centres, need another bolt as well, remove seat belt T bolt fit new extensions and refit.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

HSV Rangie wrote:Extend seat belt mounts:

2 options:

A: cut existint bolt and extend with tube. (not the best)
B: use 25mmx3mm flat drill 2 holes into at 50mm centres, need another bolt as well, remove seat belt T bolt fit new extensions and refit.

Michael.



Thanks Micheal
If its as simple as that cant I just go buy a longer bolt :?
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

Nope its a TEE bolt climb under car and you will see what I meen.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 640
Joined: Sat Dec 07, 2002 4:04 pm
Location: Snake Valley VIC

Post by Aquarangie »

When I fitted my 1 inch body lift, I had my rear seat bely bolts made up an inch longer.

Not the cheapest option. Micheals way is by far the easiest and best. I didn't know this when I did my body lift about 3 years ago and would have done it this way.

Good luck,

Trav
Land Rover- The Collingwood of 4WD's!!!!
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest