Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Vitara Motor Life

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Vitara Motor Life

Post by greg »

Okay,

I know that every engine has a different life based upon how well the owner cared for it etc...

But what i would like to know is - how many k's is the generally accepted life of a Vitara Motor?

i.e. a sierra engine does about 160 to 180 before it starts to die (generally)... what is the go with a vitara?

Thanks in advance,
Greg

p.s. Grimbo - you are banned from this thread. :D
DMA Founding Member #1 - Now Retired
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

try and stop me ha ha ha :armsup:
Ransom note = demand + collage
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

grimbo wrote:try and stop me ha ha ha :armsup:


George is getting angry :bad-words:


Right, now where is the emoticon for :bitch-slapping: ;)
DMA Founding Member #1 - Now Retired
Posts: 223
Joined: Sat Sep 27, 2003 5:10 pm
Location: NW Sydney, NSW

Vitara engines

Post by Impulsive »

The engine I just pulled outa my Vitara to rebuild, due to a mechanical failure, not wear, has done 279,000km.

Gotta say that's doing ok, considering they all seem to get the conrod bearing rattles from about 150,000 upwards (which, in reality is only a $30 set of bearings anyway...)

Adam
1998 Vitara Hard Top 2.0 EFI
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Re: Vitara engines

Post by greg »

Thanks Adam.
DMA Founding Member #1 - Now Retired
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Post by mud4b »

treated faily.....250 to 300...thousand...
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

mud4b wrote:treated faily.....250 to 300...thousand...


would you buy one from a wrecker with 170,000 on the clock. and if so, what would you expect (be prepared) to pay for it?
DMA Founding Member #1 - Now Retired
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Post by mud4b »

what sort carb or efi?
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

mud4b wrote:what sort carb or efi?


1.6L EFI Vitara Motor from an Aust Delivered Vitara
With loom, computer, air box, alternator, exhaust manifold, not the starter motor, not the gearbox.
170,000kms

Quote: "runs beautifully" - i.e. according to the wrecker - no known problems.
DMA Founding Member #1 - Now Retired
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Post by mud4b »

does he provide it on paper(test results)......i would expect to pay $1500
to $1800 at the very most......
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

I had 200,000 on mine when I killed it... they can live for many more miles (had 180 compression on remaining 3) but about 50k's with a cylinder on 10 psi and a huge oil leak is about the safe limit

:D


For $1800 I'd be wanting the starter motor too... not much more will get you a 16V halfcut so you can get P/S and A/c too :D

My carby one was about 1/2 that but bare... most wreckers up here wanted $1100 for a bare EFI 16V engine
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

i had 180,000 kms with full compression b4 the hydralic :(

210,000 and going strong now :)
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

mines got 204,000 on it, but its had some head work done to it by the previous owner just before i bought it, which would have been around 185,000
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

oh, and mines GA16a (carby) btw...
Posts: 223
Joined: Sat Sep 27, 2003 5:10 pm
Location: NW Sydney, NSW

Vitara motors

Post by Impulsive »

No probs Greg.

Oh, by the way, the engine I pulled out has had the car all over Australia. It's done very little of those km's buzzing around suburbia.

I would agree... prolly $1500, but I'd take the compression tester along & ask to borrow the rattle gun for a few minutes for the crank bolt...

If it's warranted, and you plan on fitting it fairly quickly, so you can have a listen to it, that might be OK. I'd prefer to hear it running tho.

Hope it's still in the donor car.

Adam
1998 Vitara Hard Top 2.0 EFI
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

A few bucks more and you could have my whole car :D
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

I've found two more...

Remember - these are local cars only...

One is $3,200 with 90,000kms.

The other is $1,950 with 104,000kms.
DMA Founding Member #1 - Now Retired
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Keep looking :finger:
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Damo wrote:Keep looking :finger:


Why not sell me yours Damo - we all know that you've only clocked up 2k's on it from driving up and down your drive way in the few years you've had it.

I'll even throw in a little bit of extra moo-lah for the chrome dipping you've done to it.
DMA Founding Member #1 - Now Retired
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Don't worry about life spans, bounce it off the rev limiter like the cap engine mate.
yeshemesh
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

bigsteve wrote:Don't worry about life spans, bounce it off the rev limiter like the cap engine mate.


Rev limiter !! whats that ;)

Ahh you must be talking about valve bounce ... or oil pump cavitation ... (its funny when you hear the bottom end getting noisy at real high sustained RPM cos the oil is mostly in the top half of the motor) ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 669
Joined: Wed Sep 17, 2003 11:29 am
Location: Sydney

Post by Croz »

Lads,

I think this thread is heading towards sourcing an engine, so heres my 2cents worth. If it's not then dont worry about this dribble.

I got an engine for my feroza when I last needed one from Just Japanese Parts Plus in Lansvale Sydney. It was guaranteed to have done no more than 60,000kms. It cost just on $1200 delivered.

It came with a 12 month warranty that has been tested twice now, one a small oil leak and the other a big one that saw the rear main replaced in two days! Very happy so far.
On boooooost!!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests