Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Patrol Grill

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 187
Joined: Fri Oct 10, 2003 10:15 am

Patrol Grill

Post by swbpatrol »

is it possible to paint a gq plastic grill?? and also can you buy the clips that hold the grill on from anywhere??
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Patrol Grill

Post by bogged »

swbpatrol wrote:is it possible to paint a gq plastic grill?? and also can you buy the clips that hold the grill on from anywhere??


You can paint anything you like

The clips always break. Goto a computer store, and ask for the clips that go on computer racks. Or even those plastic captured nuts from Supercheap do the job, and use a screw to hold it on.

I bought a new grill 2 yrs ago, mines fubar again now.
Posts: 187
Joined: Fri Oct 10, 2003 10:15 am

Post by swbpatrol »

what kind of paint do you use? and do u mean use the metal clips that you put on the racks to srew the screws into to hold the servers in place?
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

swbpatrol wrote:... do u mean use the metal clips that you put on the racks to srew the screws into to hold the servers in place?


Thats the ones. They fit into the squares on the body work real well, and the screws and plastic washers work well to hold the grill in.
The square things that nissan use are shit, plastic on plastic holding that on is cheap shit!

Good luck
Posts: 270
Joined: Tue Sep 30, 2003 1:55 pm
Location: Brisbane

Post by Link »

Painted plastic grill

Image

Yellow was left over 2pac from painting car.. black was a spray can..
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

I used cable ties, which held it petty well. Also put a bolt either side on the botttom. There is a hole already there that goes back to part of the metal bodywork.
THOUGHT FOR THE DAY....
Posts: 187
Joined: Fri Oct 10, 2003 10:15 am

Post by swbpatrol »

how was the yellow grill painted with special paint?
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

bogged wrote:The square things that nissan use are shit, plastic on plastic holding that on is cheap shit!


I just had my grille off and thought that the clips Nissan use were much better than the usual ones. The trick is that you have to use a screwdriver and twist them 45 degrees to take the grill off, but to put them back on you use a completely different method - you fit them to the grille first, then simply press-clip the grille into place. If you tried to put the thing back on the same way you took it off, you would definitely think they were junk.

Normally I'm not a fan of plastic clips but I have to say I thought these particular ones were good, and suitable for the job they have to do.

Still, I agree that if you've lost and/or broken some, it would be simpler and probably cheaper to replace them with something else.

Jason
This is not legal advice.
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

I just use the square plastic ones in handy packets from Supercheap, (They just push into OE holes). Auto pro etc and use self tappers with a small washer tightened just hand tight to hold grill on.
Easy to remove and refit again.

Bazzle
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

chimpboy wrote:I just had my grille off and thought that the clips Nissan use were much better than the usual ones. The trick is that you have to use a screwdriver and twist them 45 degrees to take the grill off, but to put them back on you use a completely different method - you fit them to the grille first, then simply press-clip the grille into place. If you tried to put the thing back on the same way you took it off, you would definitely think they were junk.


Never had my grill off! They are viabrating apart, EG wearing from front to back allowing the grill to viabrate, and gradually get worse.
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Post by big red »

to paint the grill you first need to use a special plastic primer available from most car accessorie places.
then just paint as normal.
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Re: Patrol Grill

Post by roly »

bogged wrote:
swbpatrol wrote:The clips always break. Goto a computer store, and ask for the clips that go on computer racks. Or even those plastic captured nuts from Supercheap do the job, and use a screw to hold it on.

I bought a new grill 2 yrs ago, mines fubar again now.


or ask me, i have 4000 of the little bastards
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Posts: 329
Joined: Thu Nov 07, 2002 5:24 pm
Location: Brisbane

Re: Patrol Grill

Post by derangedrover »

roly wrote:
bogged wrote:
swbpatrol wrote:The clips always break. Goto a computer store, and ask for the clips that go on computer racks. Or even those plastic captured nuts from Supercheap do the job, and use a screw to hold it on.

I bought a new grill 2 yrs ago, mines fubar again now.


or ask me, i have 4000 of the little bastards


Hey Roly,

Can I have some of those little bastards? Please?

You did say to ask..... ;)
Posts: 942
Joined: Sun Jul 06, 2003 8:41 pm
Location: All Mav'ed up!!! (Melbourne)

Post by marin »

nissan wants just over $2 EACH for those grille clips, needless to say, i didn't buy any, cable ties will do me for now....
Rum injected

TD42T shorty... got some bolt on and some custom stuff.

Read about it [url=http://www.patrol4x4.com/forum/showthread.php?t=18848]here![/url]
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Post by roly »

pm me your address
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

marin wrote:nissan wants just over $2 EACH for those grille clips, needless to say, i didn't buy any, cable ties will do me for now....


$2 isnt bad you tight ass prick :rofl: :rofl: shit anything else you buy to do the job properly will cost the same.. cable ties looks poo to me.. ;)
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest