Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Suzuki Skyscraper

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 36
Joined: Tue May 25, 2004 4:40 pm
Location: Melbourne

Suzuki Skyscraper

Post by Ridealldayrideallnight »

G'Day All

Just got hold of my first Sierra, it needs new springs for road worthy and just want to know peoples thoughts. The cheapest set I have found have been enforcer springs at about $110 front and $125 rear. (50mm lift) The price of ARB and Ranchos are both atleast $70 per spring more, (only 40mm lift)is it worth the extra money for the expensive springs?

Any thoughts on these or other springs would be great

Thanks
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

arb springs are the goods... nice and soft/flexy, worth the extra $$ i reckon


have a bit of a search thru the zook forum, there's a heap of info 'bout different configurations and spring types etc
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

two options:

1. get another crapped out set of springs for free (or very close to it) that are going to be road worthy and pass your roadworthy, then complain about the springs a bit more and replace them with a good set that you are going to keep forever.

2. get some good springs now and install them and pass the rwc.

Old Man Emu seem to be the springs of choice around here.

Note: if you are going to do something extreme with you suspension setup, take option 1.

Question: what is wrong with the springs?
DMA Founding Member #1 - Now Retired
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Re: Suzuki Skyscraper

Post by droopypete »

Ridealldayrideallnight wrote:
is it worth the extra money for the expensive springs?



Yes.
Peter.
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

RADRAN,

Where are you located?
DMA Founding Member #1 - Now Retired
Posts: 36
Joined: Tue May 25, 2004 4:40 pm
Location: Melbourne

Post by Ridealldayrideallnight »

I'm in melbourne,

The springs are like this: n not like this: U, I dont know if it means there totally un-roadworthy I think my mechanic might be a little pedantic, if i'm gonna replace them I figure i'll put some good stuff in rather than have to do it all again in 12 months

Thanks
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

lucky u mate... u get to see all the SPUA rigs in melb...

just for kicks, go SPOA :D :D
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Re: Suzuki Skyscraper

Post by christover1 »

Ridealldayrideallnight wrote:is it worth the extra money for the expensive springs?


yes, OME is worth every bit of what you pay (and I am a tight a***) christover :lol:
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Re: Suzuki Skyscraper

Post by droopypete »

christover1 wrote:
Ridealldayrideallnight wrote:is it worth the extra money for the expensive springs?


yes, OME is worth every bit of what you pay (and I am a tight a***) christover :lol:

I have to agree with Chris, he IS a tight arse :D
if you stuck a piece of coal up his bum, it would be a diamond in 3 weeks :lol:
Peter.
ps, go the OME's
Last edited by droopypete on Wed May 26, 2004 4:31 pm, edited 1 time in total.
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

springs 'n things

Post by Pinball »

Mate o' mine recently put enforcer set up on for a 2"rise, haven't had time to test 'em yet.....

I got Kings and Koni's, they've been pretty good, although did soften the springs recently with a change of usage...
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

RADRAN,

here's the solution for you. and even though you will owe me foreever, i won't expect you to give me any money for it.

Step1
go here:
http://www.outerlimits4x4.com/PHP_Modul ... highlight=

Step2:
Contact greyzook (who is selling that car) and say that you will take the springs from him for a price (obviously they are second hand and therefore cheaper). Note: he is selling a chassis, springs and body for 800, so surely the springs will be quite cheap compared to brand new right?

Step3:
Go to visit greyzook (just north of melbourne) and pick up the springs.

Step4:
Salute me for i have just saved you a packed of money and greyzook will be happy too as he has gotten back some money for the lwb tub that he owns and can't get rid of.

Step5:
Live out the rest of your life in debt to me :cool:

Cheers.
DMA Founding Member #1 - Now Retired
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests