Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

36 Centipedes on GU Wagon

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

36 Centipedes on GU Wagon

Post by GUEEY »

I am looking to run 36x12.5/16 simexes on my gu wagon, i currently have a 3" lift which runs 35s O.K . What sort of lift or mods are required to run this tyre. ARB Southern has a Winter special at the moment on Simex Tyres with Free Rims.

ANY ADVICE ON THIS TOPIC WOULD BE GREAT!!!
Top
Posts: 199
Joined: Mon Jan 05, 2004 11:18 am
Location: Snowy Mountains

Post by Butt Craic »

I have a coil cab ute so can't comment on the issues in the rear but I would think that unless you go to a custom offset rim you are likely to get a lot of rubbing on the inner guards. Unless you are prepared to chop the front guards or put in more lift you are likely to need one of those control arm spacer kits.

I've chopped about 4-4.5" out of the back of my guards so now fit 42's in there with no rubbing and can't remember what life was like before I grabbed the tin snips.

Sorry, not much help really, was I?? :oops:
I'm not very good looking, so I guess I better be useful . . .
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Re: 36 Centipedes on GU Wagon

Post by chimpboy »

GUEEY wrote:I am looking to run 36x12.5/16 simexes on my gu wagon, i currently have a 3" lift which runs 35s O.K . What sort of lift or mods are required to run this tyre. ARB Southern has a Winter special at the moment on Simex Tyres with Free Rims.

ANY ADVICE ON THIS TOPIC WOULD BE GREAT!!!


If you've got 35s on there now, surely you can look closely and tell whether 36s would be much of a problem..?

Jason
This is not legal advice.
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Re: 36 Centipedes on GU Wagon

Post by turps »

GUEEY wrote:I am looking to run 36x12.5/16 simexes on my gu wagon, i currently have a 3" lift which runs 35s O.K . What sort of lift or mods are required to run this tyre. ARB Southern has a Winter special at the moment on Simex Tyres with Free Rims.

ANY ADVICE ON THIS TOPIC WOULD BE GREAT!!!


What sort off prices are we talking here???
THOUGHT FOR THE DAY....
Top
Posts: 12
Joined: Sat May 01, 2004 2:15 pm
Location: South Eastern Melbourne

Re: 36 Centipedes on GU Wagon

Post by gdcobb »

turps wrote:
GUEEY wrote:I am looking to run 36x12.5/16 simexes on my gu wagon, i currently have a 3" lift which runs 35s O.K . What sort of lift or mods are required to run this tyre. ARB Southern has a Winter special at the moment on Simex Tyres with Free Rims.

ANY ADVICE ON THIS TOPIC WOULD BE GREAT!!!


What sort off prices are we talking here???
Simex tyres are priced at retial ,but with free black rims 15 or 16 with a minimin of 4
Top
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Re: 36 Centipedes on GU Wagon

Post by MQ080 »

gdcobb wrote:
turps wrote:
GUEEY wrote:I am looking to run 36x12.5/16 simexes on my gu wagon, i currently have a 3" lift which runs 35s O.K . What sort of lift or mods are required to run this tyre. ARB Southern has a Winter special at the moment on Simex Tyres with Free Rims.

ANY ADVICE ON THIS TOPIC WOULD BE GREAT!!!


What sort off prices are we talking here???
Simex tyres are priced at retial ,but with free black rims 15 or 16 with a minimin of 4


i'd check on what offset the rims are, otherwise you have not really gained anything at all. Not Grimace 0 offset, would only become worthwhile if they were -28's or something to that affect
Top
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

Re: 36 Centipedes on GU Wagon

Post by GUEEY »

GUEEY wrote:I am looking to run 36x12.5/16 simexes on my gu wagon, i currently have a 3" lift which runs 35s O.K . What sort of lift or mods are required to run this tyre. ARB Southern has a Winter special at the moment on Simex Tyres with Free Rims.

ANY ADVICE ON THIS TOPIC WOULD BE GREAT!!!
Top
Posts: 151
Joined: Mon Mar 01, 2004 7:00 am
Location: Melbourne

Post by OnPatrol »

I run 36x12.5x15 on TrakII rims for my GU4500. You may have to get rid of the front mud flaps, otherwise you'll rip them off at full lock. If you don't like the occassional scraping at full lock, then fit spacers on the front control arms to move the diff forward. At the rear, just make sure that the panhard rod is adjust properly, otherwise at full articulation the side lugs will scrape the inner side of the plastic flare.

Don't forget the spare. The 36er just fits on the rear door. With the kaymar spacer and TrakII rims there wasn't much clearance to open the doors. The 36ers will also touch the dummy tail lights so open the barn doors carefully.

cheers,
Alberto.
Top
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Contact:
Contact DiscoDino

Post by DiscoDino »

this thread is useless without PICS!!!!! :finger:
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Top
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

Post by GUEEY »

OnPatrol wrote:I run 36x12.5x15 on TrakII rims for my GU4500. You may have to get rid of the front mud flaps, otherwise you'll rip them off at full lock. If you don't like the occassional scraping at full lock, then fit spacers on the front control arms to move the diff forward. At the rear, just make sure that the panhard rod is adjust properly, otherwise at full articulation the side lugs will scrape the inner side of the plastic flare.

Don't forget the spare. The 36er just fits on the rear door. With the kaymar spacer and TrakII rims there wasn't much clearance to open the doors. The 36ers will also touch the dummy tail lights so open the barn doors carefully.

cheers,
Alberto.
Thanks Dude that was just the kind of info i was looking for.
Top
Posts: 3084
Joined: Fri Sep 12, 2003 4:55 pm
Location: Gold Coast

Post by XFACTOR »

simex's dont look that good on gu wagons.. get some bajaclaws :D 37's :) they look way better considering the width of them
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

XFACTOR wrote:simex's dont look that good on gu wagons.. get some bajaclaws :D 37's :) they look way better considering the width of them


The claws may look better (which I think they don't), but the Centipedes work heaps better here in Vic. Which is what counts, not poser value...
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 3084
Joined: Fri Sep 12, 2003 4:55 pm
Location: Gold Coast

Post by XFACTOR »

MKPatrolGuy wrote:
XFACTOR wrote:simex's dont look that good on gu wagons.. get some bajaclaws :D 37's :) they look way better considering the width of them


The claws may look better (which I think they don't), but the Centipedes work heaps better here in Vic. Which is what counts, not poser value...



yeh i spose.. didnt think of that.. im up in queensland.. so we dont get that much mud.. mainly rock..

thing i dont like bout the simex's is the side wall..no protection..
Top
Posts: 7
Joined: Thu Jun 03, 2004 8:30 am
Location: wallan victoria

Contact:
Contact nissan turbo 4wd

Post by nissan turbo 4wd »

please keep a eye out for my gq . please tell every one theres a reward if found . thanx mark.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 36 guests