Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ noisey

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2
Joined: Sun Nov 30, 2003 3:06 pm
Location: Beresfield NSW.

GQ noisey

Post by 87white60 »

My 97 2.8t has a noisey clunk in the front end somewere.
I have checked the drive line and it is not that.It just goes clunk
going around a corner letting the clutch out.Any ideas???


Thanks Steve :lol: :D :cool:
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: GQ noisey

Post by bogged »

87white60 wrote:My 97 2.8t has a noisey clunk in the front end somewere.
I have checked the drive line and it is not that.It just goes clunk
going around a corner letting the clutch out.Any ideas???



Its your body mount rubbers. Been there done that to about 4 patrols now. About $480 for a set for a LWB.

Either than or the floor pan is cracked where the firewall and floor meet.

but I'll go with the Bodymount rubbers worn away and its only the metal shaft left on metal body work.
Top
Posts: 716
Joined: Tue Jan 13, 2004 7:24 pm
Location: Melbourne

Post by TUFFRANGIE »

The same was happening to mine and all the body mounts were loose. The rubbers were fine. I bought new bolts for the front and tightened all the mounts up now quiet as a mouse for about $20 :armsup: :lol:
Top
Posts: 80
Joined: Mon Feb 23, 2004 10:01 pm
Location: Brisbane

Re: GQ noisey

Post by 5upaMav »

bogged wrote:Its your body mount rubbers. Been there done that to about 4 patrols now. About $480 for a set for a LWB.


I did mine on the weekend and there was 10mm of height difference between the old and new. Even though the bolts were tight, there was not enough clamp in them to keep the body from moving around.
Top
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

yah mine did the same, I just cut the spacers down a bit. about 10mm.
Living the dream on the hill that floods
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: GQ noisey

Post by bogged »

5upaMav wrote:
bogged wrote:Its your body mount rubbers. Been there done that to about 4 patrols now. About $480 for a set for a LWB.


I did mine on the weekend and there was 10mm of height difference between the old and new. Even though the bolts were tight, there was not enough clamp in them to keep the body from moving around.



yea I had photos of mine somewhere, they were the same as you describ, about 10mm diff at least.
Top
Posts: 80
Joined: Mon Feb 23, 2004 10:01 pm
Location: Brisbane

Post by 5upaMav »

Pics . . .
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

thats a hell of a difference. Makes me wanna get motivated to change out a few of my bushes.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

Also check out the bolts in the radius arms to front diff for tightness, when going around a corner the suspension will cycle, putting twist in the front diff (against the bushes) and if loose, the bolts will make an audible 'clunk' when going around the corner. Test it by driving up a safe stretch of road, and swerve side to side several times, it will clunk at each direction change if these bolts are loose.
Built, not bought.
Top
Posts: 187
Joined: Fri Oct 10, 2003 10:15 am

Post by swbpatrol »

how much for a set for a GQ Shorty and what is the part number as nissan are trying to sell me a complete bush kit for $2300
Top
Posts: 80
Joined: Mon Feb 23, 2004 10:01 pm
Location: Brisbane

Post by 5upaMav »

swbpatrol wrote:how much for a set for a GQ Shorty and what is the part number as nissan are trying to sell me a complete bush kit for $2300


There are a couple of body mounts available. From memory the very front set were like $31 plus GST and the rest were something like $35 plus GST. There are 8 on a shortie (that I have seen), so about $350 all up.

Part numbers . . . I could get them if I still have the plastic bags that the mounts came in. I'll check.
Top
Posts: 187
Joined: Fri Oct 10, 2003 10:15 am

Post by swbpatrol »

thanks for that supa mav. Nice rig you have, have you got any good photos??
Top
Posts: 80
Joined: Mon Feb 23, 2004 10:01 pm
Location: Brisbane

Post by 5upaMav »

Screwy_ScrewBall wrote:thats a hell of a difference. Makes me wanna get motivated to change out a few of my bushes.

screwy


Yeah . . . it is an easy job. Took me a couple of hours on my own! Its just one of those unsexy jobs that doesn't make the truck any more capable. It does feel a lot better to drive now tho. Not so many of those funky "bump" noises.
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

5upaMav wrote:
Screwy_ScrewBall wrote:thats a hell of a difference. Makes me wanna get motivated to change out a few of my bushes.

screwy


Yeah . . . it is an easy job. Took me a couple of hours on my own! Its just one of those unsexy jobs that doesn't make the truck any more capable. It does feel a lot better to drive now tho. Not so many of those funky "bump" noises.


yeah i may just get around to it me thinks

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 80
Joined: Mon Feb 23, 2004 10:01 pm
Location: Brisbane

Post by 5upaMav »

I could only find two bags . . .

RUBBER ASSY-BOD 95510-06J00
RUBBER-BODY MOU 95520-06J00

swbpatrol wrote:thanks for that supa mav. Nice rig you have, have you got any good photos??


Yeah, I love my Mav. It might not be the prettiest or have the most mods but its been an absolute heap of fun. She is making way for a GU tho!!

Here is a pic of me going over the pimple at Black Duck Valley.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest