Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sliders - What colour to paint ??

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 549
Joined: Mon Oct 28, 2002 11:53 am
Location: Sydney

Sliders - What colour to paint ??

Post by slowhilux »

Jeremy (surfection) has almost finished the sliders for my 80 series, which look farking trick, and nice and beefy :D :armsup: . Full credit to jeremy, they are MAD sliders.

He reckons i should paint them white, i say pus :finger: (im in 2 minds about his tho!), im NOT painting them black, cos its boring, and everyone paints 'em black :roll: . The missus reckons i should paint them Holden Metallic Green, as seen on the VY SS utes and sedans, and im thinking the Ford Blood Orange (?), on the BA XR6's and XR8's.

I DONT CARE ABOUT SCRATCHING THE FAWK OUTTA THEM, THATS WHAT THEY ARE THERE FOR!

Now, any one got any ideas?? The truck is white, the bullbar is white, and the rear bar is black, if that helps :roll:
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

go white. :D
Gq ute new built
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

jeremy made them so i vote rainbow! :smilecolros:
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

same colour as your bull bar.
This is not legal advice.
Top
User avatar
Surfection
Minion #1
Posts: 1151
Joined: Fri Oct 25, 2002 8:18 pm
Location: Wollongong

Contact:
Contact Surfection

Post by Surfection »

N*A*M wrote:jeremy made them so i vote rainbow! :smilecolros:


You'd know cutie pie !!! ;)

White is winning the votes so far !!!!!! :finger:
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

start a poll? :D
Gq ute new built
Top
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

You could paint them black or charcoal, but with a strong pearl or metallic like on skiboats. That way they would blend in with the truck but dazzle in the light.
Top
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

or chrome..
Top
Posts: 144
Joined: Sun May 23, 2004 12:36 pm
Location: Melbourne

Post by mr Z »

chimpboy wrote:same colour as your bull bar.


here here! :D
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

go black. and paint your bullbar and rims black to match your rear bar.

would be way too much white.
Top
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

N*A*M wrote:jeremy made them so i vote rainbow! :smilecolros:


:rofl:
Top
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

Post by bj56 »

get rid off white bull bar paint it hammer tone silver and hammer tone side steps it looks sweet
Top
Posts: 549
Joined: Mon Oct 28, 2002 11:53 am
Location: Sydney

Post by slowhilux »

Looks like white is popular then!

You win Jeremy, white it is.....



















......i think... :finger:
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

i change my vote. im goin with BJ56. hammer it!
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

all my bar work and exo are painted in Charcoal Hammerite looks fantastic, is really chip resistant and is easy to touch up. But I don't think it comes in rainbow :D
Ransom note = demand + collage
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Black or they will make the rig look lower if they are colour coded.
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

Maybe you should go red with a touch of white. Sounds like a nice pink is the way to go for you, if you can;t make up your mind. This is a tech forum, not an episode of the block :lol: :lol:

All jokes man, seriously, hammertone those fucker , they wil get rashy eventually and hammer in a can is easy touchup with good looks. Or urban camo...
Built, not bought.
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

My bullbar, roof rack, and sliders are all charcoal hammertone.

Comes up quite well, makes it a bit different from all the cars with every accessory black, and is pretty forgiving of any bruises the track may inflict.

Aside: Just finished the sliders, now I have to redo the way they mount to the chassis... that'll teach me to rely on measurements and not bolt stuff up at each step... grrr.

Jason
This is not legal advice.
Top
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

Seen the "charcoal" powdercoat? It's basically dark grey with white spots to give metallic effect. Matches up well with white duco.

See wheels below.
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

chimpboy wrote:Aside: Just finished the sliders, now I have to redo the way they mount to the chassis... that'll teach me to rely on measurements and not bolt stuff up at each step... grrr.


I hate that! :x Tolerances always stack up to ream you big time! :bad-words:

That Murphy has a lot to answer for! :bad-words: :x :bad-words:

Oh, and I vote hammertone...

Scott
Top
User avatar
Surfection
Minion #1
Posts: 1151
Joined: Fri Oct 25, 2002 8:18 pm
Location: Wollongong

Contact:
Contact Surfection

Post by Surfection »

NJ SWB wrote:
chimpboy wrote:Aside: Just finished the sliders, now I have to redo the way they mount to the chassis... that'll teach me to rely on measurements and not bolt stuff up at each step... grrr.


I hate that! :x Tolerances always stack up to ream you big time! :bad-words:

That Murphy has a lot to answer for! :bad-words: :x :bad-words:

Oh, and I vote hammertone...

Scott


Welders and the heat generated whilst using them have alot to answer for as well !! :lol:

I'm starting to sway towards hammertone philbert, maybe do them white at first and if they look :rainbow: redo them. If you're lucky i'll finish them tomorrow night, better remove that cargo barrier or bring a trailer !! :lol:
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

i reckon hammertone too... look heaps better than white! paint ur bullbar while ur at it phil :armsup:
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 1175
Joined: Mon Dec 09, 2002 6:25 pm
Location: sydney

Contact:
Contact XXXL80

Post by XXXL80 »

go black ya Hmm :finger:
my 80 is gone :(

check out my new website:

http://members.optusnet.com.au/pearsallk/index.html
Top
Posts: 549
Joined: Mon Oct 28, 2002 11:53 am
Location: Sydney

Post by slowhilux »

Jeremy,
I will bring the old mans ute over when you finish them.

Luke,
Black = UBER boring :finger:

Im actually liking the idea of charcoal hammertone too :?
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
Top
Posts: 1175
Joined: Mon Dec 09, 2002 6:25 pm
Location: sydney

Contact:
Contact XXXL80

Post by XXXL80 »

slowhilux wrote:Jeremy,
I will bring the old mans ute over when you finish them.

Luke,
Black = UBER boring :finger:

Im actually liking the idea of charcoal hammertone too :?


or white and then get the rear painted white as well...

oh by the way your Grimace :finger: :D :D
my 80 is gone :(

check out my new website:

http://members.optusnet.com.au/pearsallk/index.html
Top
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

I know.......why don't we contact Renovation Rescue for an opinion.....or we can petition Queer Eye for the Straight Guy to add a vehicular decorator to that wacky crew!!!!

My vote.....match the sliders to the curtains and the jocks you are wearing now!!!!!!! You decide if you want checks or horizontal or vertical stripes.
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Top
Posts: 549
Joined: Mon Oct 28, 2002 11:53 am
Location: Sydney

Post by slowhilux »

bluemav,
:roll: :roll: :finger:

OK, im 99% sure im painting them black, yes, i know i said i wouldnt, but they will be painted in Wet Look black......mmmmmm wet.... :D , always shiny....black bling!! :finger:
Phill
1995 DX 80 series, brought to you by:- 1HDFTE, A750, PWR, Secret Squirrell Steinbauer, BFG, GME, Engel, ARB, Kaymar, and my empty wallet!
Top
User avatar
Surfection
Minion #1
Posts: 1151
Joined: Fri Oct 25, 2002 8:18 pm
Location: Wollongong

Contact:
Contact Surfection

Post by Surfection »

slowhilux wrote:bluemav,
:roll: :roll: :finger:

OK, im 99% sure im painting them black, yes, i know i said i wouldnt, but they will be painted in Wet Look black......mmmmmm wet.... :D , always shiny....black bling!! :finger:


*cough*Grimace*cough* :finger:




They is fineeto !! :armsup:
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

man you do know a stock 80's weighs 3 ton, looking at them sliders you will need to regear to get the thing to move. BEEF


NICK
TECH SCREW GURU
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

man you do know a stock 80's weighs 3 ton, looking at them sliders you will need to regear to get the thing to move. BEEF


NICK
TECH SCREW GURU
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests