Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Power Steer Problems

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Power Steer Problems

Post by Bartso »

hey guys i have droped in a VN V8 into my patrol i have used the holden power steer pump when i go off road the slightest resistance against the tyres and i get a huge squeeling noise is my belt too loose cause i think i have it tightish as it is :?:
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

Post by matthewK »

could be lose
could have a slight block in the hose somewhere
or the power steering box itself

is the vn pump good to use on a patrol? seen as ya moving much larger tyres?? specialy out on the tracks?
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

not sure if it is good enough does any one know?
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

MAYBE the pump hasn't got the PSI capacity for turning the larger rubber. Does the pump 'buzz' a lot when turning the steering? It could be bypassing internally..

Nick
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

it does buzz a little bit when turning then at full lock there is alot of squeeling
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

Post by matthewK »

maybe have to upgrade ya power steering pump,
my thought were cause theres a lil to alot more tyre to turn it put it under far more strain
then if it where back on the vns smaller tyre

will the GQ pump adap onto the vn motor?
its in the same spot isnt it?
same side and all from memory
Top
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

get a new belt and keep it tight, and carry a spare. vn v8 had trouble with ps belts from new and , keep it at the correct adjustment.
Living the dream on the hill that floods
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

The squealing is from a poorly adjusted belt.....

retighten the belt and try again .......

also is the belt a new one or the one from the motor, maybe replacement time for the belt......

a handy can of spray stuff called "GRIPPO" / " BELT GRIP" is availiable from 99% of auto shops...... helps with sliping belts really well, I use heaps of it as the Patrol is usually in wet conditions and the 'rubber/steel pully/ & water combination really does SFA for belt life and grip !!

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

I'd bet it is a loose belt too, had the same problem on my patrol. If it is a Saginaw P/S pump it will have plenty of grunt to turn the larger tyres. My Saginaw pump is off an old 202 powered Commodore and tyres my 35s with ease, as long as the belt is tight.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

thanks guys will do that if i still have problems you guys will hear from me again but some people say that i might have to upgrade the pump
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

can any one tell me the psi a GQ patrol power steer pumps out and how much a vn v8 power steer pumps out
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 85
Joined: Wed Jun 02, 2004 11:26 am
Location: Homeless

Post by Dirty Dave »

Bartso wrote:can any one tell me the psi a GQ patrol power steer pumps out and how much a vn v8 power steer pumps out


Ring Driveline Services at archerfield they will know all the specs on Both p/steer pumps on 3275 7650 for they rebuild them on site. They rebuilt my FJ40 manual steer box and even with 35's on 10inch rims and a wrong amount of lift it didn't wonder on the road.

Cheers
Dave
Xtreme Bolt on Bandit....and your mum loves it!!!
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Makes no diffference either way, as suggested above Tighten belt...

Bazzle
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

i have tightened the belt but it appears when i am at stand still and try to turn its worse i had a look under the bonnet and it looks like the pump is stopping as i turn and the belt is tight
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Pump stopping is a different story, hold at fast idle to see if it turns,
then it is either pump not highenough output at idle or it may be bleeding around vanes.

bazzle
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

what is and how can i tell if it is bleeding around the veins is it possible the fluid is boiling and how can i tell if this is?
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Is it ok when cold>>

Try some Moreys oil in system, about 200mil

Bazzle
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 7 guests