so while i've got it all apart i want to lift it a couple of inches seeing as i've got a bodylift. so does anyone have links to sites with where and how they've done it?
and i'll also be getting a tank protector
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
vitara fuel tank
vitara fuel tank
well i finally managed to puncture my fuel tank yesterday
so while i've got it all apart i want to lift it a couple of inches seeing as i've got a bodylift. so does anyone have links to sites with where and how they've done it?
and i'll also be getting a tank protector
so while i've got it all apart i want to lift it a couple of inches seeing as i've got a bodylift. so does anyone have links to sites with where and how they've done it?
and i'll also be getting a tank protector
Technical Article Archive http://zukiworld.com/
http://www.whitepineclub.com/members/kd ... /index.htm
http://www.whitepineclub.com/members/kd ... /index.htm
Re: vitara fuel tank
antt wrote:well i finally managed to puncture my fuel tank yesterday
so while i've got it all apart i want to lift it a couple of inches seeing as i've got a bodylift. so does anyone have links to sites with where and how they've done it?
and i'll also be getting a tank protector
Where did you get the hole in the tank, I take it you were offroad at the time. Can you source a plate from say another fourby and bolt that up. I could have a look on the one under the nissan and see if it will bolt up under the zook for you!
Antt,
Depending on the size of your body lift you either cut the tank mounts off and raise it to just under the rear X member which would give you about 25m lift or if you've got 60mm or more of body lift you move it above the rear x member take the fuel vapor separator off the tank and you can get 90mm lift out of it.
Theres two ways to remount it some people just drill through the X member ands bolt it back on like the http://www.k9rdj.co.uk/tanklift.htm way or else you can do what I done and carefully cut the mounts off and shorten the front ones then put the rear ones on top of the X member and weld em back on.
Shane
Depending on the size of your body lift you either cut the tank mounts off and raise it to just under the rear X member which would give you about 25m lift or if you've got 60mm or more of body lift you move it above the rear x member take the fuel vapor separator off the tank and you can get 90mm lift out of it.
Theres two ways to remount it some people just drill through the X member ands bolt it back on like the http://www.k9rdj.co.uk/tanklift.htm way or else you can do what I done and carefully cut the mounts off and shorten the front ones then put the rear ones on top of the X member and weld em back on.
Shane
yeah was out having a quick, easy, supposedly carnage free run to cure my hangover yesterday and thought i'd managed to come out unscathed, till i walked out by my car last night and smelt the petrol.
got it repaired today, so i'm gonna look at the lift and bashplate on thursday.
too bad i've only got a 50mm bodylift so i wont be able to lift it that far
got it repaired today, so i'm gonna look at the lift and bashplate on thursday.
too bad i've only got a 50mm bodylift so i wont be able to lift it that far
antt wrote:yeah was out having a quick, easy, supposedly carnage free run to cure my hangover yesterday and thought i'd managed to come out unscathed, till i walked out by my car last night and smelt the petrol.
got it repaired today, so i'm gonna look at the lift and bashplate on thursday.
too bad i've only got a 50mm bodylift so i wont be able to lift it that far
Why can't you break thre front diff.
SAS 
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
www.overkill4x4.com
OVERKILL ENGINEERING wrote:antt wrote:yeah was out having a quick, easy, supposedly carnage free run to cure my hangover yesterday and thought i'd managed to come out unscathed, till i walked out by my car last night and smelt the petrol.
got it repaired today, so i'm gonna look at the lift and bashplate on thursday.
too bad i've only got a 50mm bodylift so i wont be able to lift it that far
Why can't you break thre front diff.
SAM
not this time sam, only had the 30's on, and stayed off the rocks
antt wrote:OVERKILL ENGINEERING wrote:antt wrote:yeah was out having a quick, easy, supposedly carnage free run to cure my hangover yesterday and thought i'd managed to come out unscathed, till i walked out by my car last night and smelt the petrol.
got it repaired today, so i'm gonna look at the lift and bashplate on thursday.
too bad i've only got a 50mm bodylift so i wont be able to lift it that far
Why can't you break thre front diff.
SAM
not this time sam, only had the 30's on, and stayed off the rocks
Pansy
OVERKILL ENGINEERING
www.overkill4x4.com
www.overkill4x4.com
OVERKILL ENGINEERING wrote:antt wrote:OVERKILL ENGINEERING wrote:antt wrote:yeah was out having a quick, easy, supposedly carnage free run to cure my hangover yesterday and thought i'd managed to come out unscathed, till i walked out by my car last night and smelt the petrol.
got it repaired today, so i'm gonna look at the lift and bashplate on thursday.
too bad i've only got a 50mm bodylift so i wont be able to lift it that far
Why can't you break thre front diff.
SAM
not this time sam, only had the 30's on, and stayed off the rocks
Pansy
i was too hungover to change tires
Who is online
Users browsing this forum: No registered users and 0 guests