Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MTR's

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Post by OVERKILL ENG »

yeah it worked
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

they look like a pretty true 37".
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

awesome 8)
hands and mums dont count!!!
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

Sam, the pics you sent me of the 4runner, they are 37's?




NICK
TECH SCREW GURU
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Post by OVERKILL ENG »

No the 4-runner runs 35's we looked at fitting a set today but they would srub bigtime.
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

overkill wrote:No the 4-runner runs 35's we looked at fitting a set today but they would srub bigtime.



what widht is he on?


i want to run the 37's but dont think that i will have the height too do so.


NICK
TECH SCREW GURU
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Post by OVERKILL ENG »

He runs 8 inch rims with 2 inch spacers the main place it was going to scrub was front and back of the rear wheel arches. With the tube front end we have moved the diff forward enough that they would just srcub on up travel with lock on.
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

i have enough room in the front without a drama, the axle is forward, fiberglass guards and about 6 inch of lift.

The rear is where i am also having the trouble.

I have 1 inch offset wheels, wider housing and ifs hubs so overall i am about 5 inch wider, i do believe that that is enough width but i also believe that the tyres will rub front and rear in the rear wheel wells.



NICK
TECH SCREW GURU
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Hey guys,

I was just in Pirate and found a topic 40 inch MTR's

I know we probarbly wont see any here for quite some time, but some of you with conections may be interested.

They look BIG!!

I dont know how to send the address,but if you go into general 4x4 discussion and scroll down i'm sure you will find it.
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

KRiS
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

There you go. Check those babies out :shock:
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

i would say 12 months and we will be able to get them here, unless you bring them in yourself, althou that could be pricey. It seems that most things seem to take about a year to get here, i know the 37's took alittle longer. Lance of pirate had a set of 37's at his place for sale when i was there last year and he had already had them for about 3 months, so yeah alittle over a year there.

Considering the price of the 37 i think that there will be a good market for the larger 39.5+ mtrs, the 37's can be had for less than $400 and compared to a swamper makes for some dam good buying, once again making only a prediciment the 39-42's should be around 500-700 which is alot cheaper than the swampers of similar sizes.

What do you all think the market for the 37+ inch tyres will be like? i believe that what we drive here is completely different to that in which they have in the states, in the states they have smooth dry rock with no water or mud involved like we do here. Although looking at what was driven at the TTC this year i think that the MTR's will be a competitive tyre next year and they seem to be selling really well as nowhere here in queensland has them, well they do now but that is only becuase the shipment just came in.

NICK
TECH SCREW GURU
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

POS wrote:There you go. Check those babies out :shock:



just thought of something when i read that reply, they say the tyres are up around the 40inch mark, are they?

take for example your tyres, sold as a 38.5 but measure up around the 42 mark which makes for good buying in relation to over all height, i think that if goodyear can market there larger tyres in the same price range or maybe less than the mickeys there is going to be a huge market, providing there tyres are what they say they are, i know kellys, bfg and cooper over rate there tyres, eg 33.5 real height when measured is sold as a 35, where as simex, goodyear and mickey seem to have it right if not under rated, example your claws, way over 38.5

NICK
TECH SCREW GURU
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Yeh i think i read they were a little bit bigger than 40 inch, how much dont know.

The other thing to is BFG are looking at or have a 40 inch Krawler in the states. Apparently they are awesome on rocks as the compound is so soft.

Cjer runs the MTR's on his jeep and they worked really well at LCMP on the smooth rock and also on sharp wet rocks.
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

POS wrote:Hey guys,

I was just in Pirate and found a topic 40 inch MTR's

I know we probarbly wont see any here for quite some time, but some of you with conections may be interested.

They look BIG!!

I dont know how to send the address,but if you go into general 4x4 discussion and scroll down i'm sure you will find it.


NEWBIES :fist: :roll:
hands and mums dont count!!!
Posts: 374
Joined: Mon Oct 28, 2002 8:09 pm
Location: BRISBANE

Post by v8grunt »

bj on roids wrote:
POS wrote:Hey guys,

I was just in Pirate and found a topic 40 inch MTR's

I know we probarbly wont see any here for quite some time, but some of you with conections may be interested.

They look BIG!!

I dont know how to send the address,but if you go into general 4x4 discussion and scroll down i'm sure you will find it.


NEWBIES :fist: :roll:


the 37" mtrs are in qld and are the same tyre as in the us. the tyres were designed for sand stone and dry conditions silica is added to the compound for sandstone performance! silica is what tyre company adds for wet weather grip hence these tyres will wok well on rock wet or dry :?: and the recomded price fo a 37' is $430 each :roll:
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

$430

FARK THAT CHIT OFF

they are worth...maybe $350
hands and mums dont count!!!
Posts: 374
Joined: Mon Oct 28, 2002 8:09 pm
Location: BRISBANE

Post by v8grunt »

bj on roids wrote:$430

FARK THAT CHIT OFF

they are worth...maybe $350


for $350 you can buy a 35"bfg muddie
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Big Meats

Post by Shorty40 »

v8grunt wrote:
bj on roids wrote:$430

FARK THAT CHIT OFF

they are worth...maybe $350


for $350 you can buy a 35"bfg muddie



Hey BJ,

Have you considered these big meats ? :twisted:
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

..

Post by hypo »

35" BFG muds.....

BJ wouldnt b hardcore enuf 4 those big meats
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests