Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

33s on IFS Hilux?

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 21
Joined: Sat Jun 05, 2004 5:24 pm
Location: Rockingham WA

33s on IFS Hilux?

Post by delphisii »

Anyone know if I could put 33" tyres on a 99 IFS Hilux ute? Single cab traytop.
Would a body lift on the cab be enough to get them to clear? I think the rears would be ok on a traytop?
Then there's the question of if a 3.0 lt diesel (non turbo) will push them. Thinking of Cooper STTs
Any help appreciated, Cheers Wayne
Posts: 422
Joined: Mon Jan 06, 2003 5:57 pm
Location: On an Octopus

Post by pegasus »

Hi,

I have an IFS 4runner. I am running 33's. Needed a 2 inch body lift. I have the 2.4 Litre Diesel. Its slow, but managable.

Stew
Posts: 21
Joined: Sat Jun 05, 2004 5:24 pm
Location: Rockingham WA

Post by delphisii »

Thanks for that Pegasus. Did you notice much difference when you changed to the bigger tyre?
Posts: 422
Joined: Mon Jan 06, 2003 5:57 pm
Location: On an Octopus

Post by pegasus »

yes, heaps...

Firstly. and most obviously, a lot more sluggish.

Also effects steering, as each bump in the road seems to have a much greater effect on which way the wheels ponit. The steering also seems much lighter while moving, worse at higher speeds. Its controllable though.

I also have fairly big offset rims, and my front wheel bearings hate me.

The ride seems to be a bit harsher with the bigger tyres as well. I have another set of stock 4runner rims and tyres, Much better ride.

Also, breaking steering links and CV's is much easier.

Stew
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

I have 90 mod solid axle with 2.8 diesel and the bizarre thing is my truck is heaps better with 33's. It now has power to overtake (engine always had lotsa low end grunt but ran out of steam 70+ kph) seems to ride a little better and handling hardly affected.

Seriously- it is like my truck is geared just right with the 33's. Very happy.
Posts: 185
Joined: Thu Jul 31, 2003 11:31 am
Location: Brisbane

body lift

Post by maty »

you need a 2 inch body lift, that is using 8 inch rims, for 10 inch rims you need 2" in the body plus 2" in the suspension. - they still scrub a bit.

with jsut the body lift and 33x12.5 on 8 inch rims they will still scrub on the body but only slightly.

mat
MY04 Jeep Wrangler
MY07 SS Ute
Posts: 21
Joined: Sat Jun 05, 2004 5:24 pm
Location: Rockingham WA

Post by delphisii »

Hmmm................Looking like I should stick to the 31s. :cry:
Thanks all for the help.
Cheers, Wayne
Posts: 249
Joined: Mon May 26, 2003 9:37 pm
Location: brisbane

Post by greenhilux »

dude i got a 3lt(non turbo) 2000 hilux with 33'' mickey thompson baja calws. i got a 2;; body and wound up the torsion bars 1 /12 '' so it sits level and its wett. pushed them fine.,
Posts: 185
Joined: Thu Jul 31, 2003 11:31 am
Location: Brisbane

tyres

Post by maty »

get bigger most people have around 31" all the wheel ruts are dug to that depth - with a diesel non turbo go 32x11.5 BFG muds... you'll never look back - will fit on with no modifications.
MY04 Jeep Wrangler
MY07 SS Ute
Posts: 98
Joined: Tue Apr 15, 2003 1:14 am
Location: Somewhere in Australia.......

Post by Goodsy »

Running 32/9.5 Centipedes on my lux. They fit no problems.
No body lift required just a little trimming of the mud flap and flare.
Mine is an SR5 though so you may not need to trim at all.

32's in the centipede are actually taller than a 33 inch bfg.

If you stick to the narrower tyre ie 255/85R16 you shouldn't have a problem.

Know a guy hows running 34 inch swampers on an ifs lux no body lift.
Posts: 194
Joined: Tue Oct 14, 2003 8:26 pm
Location: brisbane

Post by daveo »

ive got 31' bfg At on my 98 ifs lux and they rub the back of the guard. no mods at all except for sagged torsion bars. need to wind them up a bit me thinks.
Posts: 21
Joined: Sat Jun 05, 2004 5:24 pm
Location: Rockingham WA

Post by delphisii »

Hi Guys,Thanks all for the help and info on the tyre sizes. Have had an offer to try out some 33s so will see how they fit up and make a call then.
Cheers, Wayne
Posts: 421
Joined: Fri Dec 05, 2003 12:35 pm
Location: Tweed coast

Post by 98lux »

Got 31" simex on mine with no scrubing, but i no i would not fit any bigger on with out a lift ( i do have a wider offset)
if ya gona rev it, Chev it
Posts: 139
Joined: Tue May 18, 2004 8:41 am
Location: Kanwal, Central Coast NSW

Re: body lift

Post by DAWSO 4x4 »

i 've got a mate with a single cab same model as yours he wants to do a body lift 2" just wondering what he should look out for such as radiator steering and so on all help would be appreciated :)
Posts: 21
Joined: Sat Jun 05, 2004 5:24 pm
Location: Rockingham WA

Post by delphisii »

Ended up with 31x10.5s Cooper STTs. Dont think I could go any bigger stock as they just touch on a trailing edge of my bullbar at full lock/compression. Time to trim up the bar!
Cheers, Wayne
Posts: 185
Joined: Thu Jul 31, 2003 11:31 am
Location: Brisbane

lift steps

Post by maty »

things to watch for
-brakes line lengths
-fuel filler length
-untighten the steering shaft and made sure there is enough length when raised
-before tensioning up body bolts check that the gear stick works in all gears with out hitting the body same with transfer lever
-lift slowly!!!!!!!!!!!!!
-also watch for any engine electric wires that may be tight and might need extension 2" should be ok
-also adjust handbrake for new position (should disconnect when lifting)
-check radiator hoses and height of radiator (lower if neccessary)

best of luck
mat
MY04 Jeep Wrangler
MY07 SS Ute
User avatar
HG
Posts: 450
Joined: Mon Aug 02, 2004 10:11 pm
Location: Mexico where the hills are big

Post by HG »

I run 35" Simex J/T's with 4" lift & 2" body lift on my '91 Surf and have no problems :cool:
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Posts: 614
Joined: Tue Jul 27, 2004 7:47 pm
Location: Penrith

Post by UZJ40 »

my wifes 88 surf has a 4" Skyjacker lift kit with 33's. but the gearing is now a shocker and it takes a long time to get up to speed.
Posts: 1494
Joined: Mon May 24, 2004 5:21 pm
Location: Bris, or under the sea

Post by Going_up »

i just fitted 33's to my 4 runner ans i dont get any scrubing,
i got leaf spring offset rins, and a 2in body lift,
the only prob i have is the tyers sticking out 2 in, i just gotts get flairs
If at first you dont succeed... Skydiving is not for you!
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests