Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

PUT UP OR SHUT UP!!!!!!!!!!!!!!!!!!!!

Post all your Competition and Event info here.

Moderator: evanstaniland

Post Reply
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

bj on roids wrote:
Bartso wrote:Yea i spose i could give a coupla away for someone competing :D


nice, cheers!!

how about lettin me take your V8 shorty for a run? :cool: ;)


Probably not mate there's more sh*t i want to do to it before it gets out on the comp tracks how about we get magget watching everyone else :D :D :D
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

high n mighty wrote:Who where the outerlimits guys on rover park on the weekend??? I didn't know who you where but saw ya's, so gday anyway :D :D


What vehicle!

We went down on Sunday, Blue tube buggy!

But we did see one or two other O/Limits Rigs getting around!

I think Big Red Hilux was there, Area54 and BIGNISSAN aswell!
User avatar
Aza
Posts: 3886
Joined: Thu Dec 12, 2002 4:41 pm
Location: Loganholme, Qld

Post by Aza »

i am surprised with the number of rigs i see near my place with outerlimits stickers on them and most aint even members, i think out little site is getting a name for itself ;)
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

i've never seen another outerlimits rig on the road :cry:

anyway, its only about 40 odd days to go till PUOSU :armsup: gonna be awesome :D
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

antt wrote:i've never seen another outerlimits rig on the road :cry:



Only ever seen one. And that was POS's Disco :cool:
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

POS wrote:
beebee wrote:
POS wrote:
No, after beating us at XRCC i have decided your not invited! :lol: :lol: :lol:



Invited or not - I'll be there :finger:

Anybody got any contacts that could assist in getting my vehicle towed down there? I have no trailer or tow vehicle. If there's someone going down with a truck licence maybe I could hire one? Getting sick of driving to and from events and by the sounds of things, the chances of being able to drive home are slim :D


Thats the attitude we like to see!!!!

:armsup: :armsup: :armsup: :armsup: :armsup:


I never take driving home for granted - even if I'm only going round the block :shock:

Damn unbreakable hiluxs :roll:
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

Bartso wrote:
bj on roids wrote:
Bartso wrote:Yea i spose i could give a coupla away for someone competing :D


nice, cheers!!

how about lettin me take your V8 shorty for a run? :cool: ;)


Probably not mate there's more sh*t i want to do to it before it gets out on the comp tracks how about we get magget watching everyone else :D :D :D


take me for a spin in it!
hands and mums dont count!!!
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm

Post by STIKA »

POS, do you still require our assistance :?:
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

bj on roids wrote:
Bartso wrote:
bj on roids wrote:
Bartso wrote:Yea i spose i could give a coupla away for someone competing :D


nice, cheers!!

how about lettin me take your V8 shorty for a run? :cool: ;)


Probably not mate there's more sh*t i want to do to it before it gets out on the comp tracks how about we get magget watching everyone else :D :D :D


take me for a spin in it!


If i bring which i should be no worries
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Posts: 1781
Joined: Fri Jan 17, 2003 6:44 pm
Location: Central Coast NSW

Post by Midget »

Hey guys
From what i hear and have read on the board,There are a couple of guys that are basically FLAMMING PUOSU. :roll: :roll:
I have had a go at them about this and they are still adiment that they don't need to enter such a comp. :roll:
So basically i think what they are saying is that they are to good a driver and there rigs are to good to enter this event... :lol: :lol: :roll: :roll:
There have posted in the trips and tracks section under magical mystery drive,You will see them there.. :lol:

So i thought i would post this comment and gee all you guys up to jump aboard and give these guys hell... :lol: :lol:

If you think you have it,Then PUT UP OR SHUT UP..
Team 4x4 Specialist 005
Proudly Sponsorsed By
WWW.MAXXIS.COM
WWW.STAUNPRODUCTS.COM
COUNTRY WIDE MECHANICAL
Thanks to
WWW.OPW.COM.AU
WWW.DOBBINENGINEERING.COM
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Fourwheelin wrote:Hey guys
From what i hear and have read on the board,There are a couple of guys that are basically FLAMMING PUOSU. :roll: :roll:
I have had a go at them about this and they are still adiment that they don't need to enter such a comp. :roll:
So basically i think what they are saying is that they are to good a driver and there rigs are to good to enter this event... :lol: :lol: :roll: :roll:
There have posted in the trips and tracks section under magical mystery drive,You will see them there.. :lol:

So i thought i would post this comment and gee all you guys up to jump aboard and give these guys hell... :lol: :lol:

If you think you have it,Then PUT UP OR SHUT UP..



Now just who you referin bout here JAMIE :?: :roll: you know i only web wheel that way i dont damage anything :D
[b][i] DAN [/i] [/b]


:silly:
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

Fourwheelin wrote:Hey guys
From what i hear and have read on the board,There are a couple of guys that are basically FLAMMING PUOSU. :roll: :roll:
I have had a go at them about this and they are still adiment that they don't need to enter such a comp. :roll:
So basically i think what they are saying is that they are to good a driver and there rigs are to good to enter this event... :lol: :lol: :roll: :roll:
There have posted in the trips and tracks section under magical mystery drive,You will see them there.. :lol:

So i thought i would post this comment and gee all you guys up to jump aboard and give these guys hell... :lol: :lol:

If you think you have it,Then PUT UP OR SHUT UP..


yeah sum of us work 2 much and have other shiat 2 do other than build little tube buggys with purple pop rivetted panels and dont have time 2 rock stack.. :finger: :finger: :roll: :roll: :armsup:

ill b tryin my ass off 2 get my junk sorted out and b there but after reading the rules the list of things 2 b done after sortin out the probs with how it drives is very long, but we will c wot happens
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

HYPO!

The specs for the vehicles is what we are aiming for in the future!!!

For the first comp as long as you have a well built full roll cage, 4 point harness and a winch your rig would be fine!!!!

But then again your full bodied BUS wouldn't stand a chance against some Tube welded together, pop rivets and some purple paint so i suppose there little point of coming up then!! ;) ;) :lol: :lol: :lol: :finger: :finger: :finger: :finger: :finger: :lol: :lol: :lol: :finger: :finger: :lol: :lol: :finger: :lol: :finger: :lol: :finger: :lol:
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

POS wrote:HYPO!

The specs for the vehicles is what we are aiming for in the future!!!

For the first comp as long as you have a well built full roll cage, 4 point harness and a winch your rig would be fine!!!!

But then again your full bodied BUS wouldn't stand a chance against some Tube welded together, pop rivets and some purple paint so i suppose there little point of coming up then!! ;) ;) :lol: :lol: :lol: :finger: :finger: :finger: :finger: :finger: :lol: :lol: :lol: :finger: :finger: :lol: :lol: :finger: :lol: :finger: :lol: :finger: :lol:


the way the tray is mounted it wont handle a decent roll so its all gotta b redone b4 i compete again and after the test run last weekend i have a few teething probs suspension and clearence wise 2 sort out b4 i even look like getting it ready 2 compete.

but one things that is sorted is that i gunn goto the local metal land and get hepas of tube and heaps of sheet metal and heaps pf pop rivets and just tie it all down on the back of my tray and paint the hole thing purple/blue/orange/red/grenn and b done with it

FULLY SICK
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

hypolux wrote:
POS wrote:HYPO!

The specs for the vehicles is what we are aiming for in the future!!!

For the first comp as long as you have a well built full roll cage, 4 point harness and a winch your rig would be fine!!!!

But then again your full bodied BUS wouldn't stand a chance against some Tube welded together, pop rivets and some purple paint so i suppose there little point of coming up then!! ;) ;) :lol: :lol: :lol: :finger: :finger: :finger: :finger: :finger: :lol: :lol: :lol: :finger: :finger: :lol: :lol: :finger: :lol: :finger: :lol: :finger: :lol:


the way the tray is mounted it wont handle a decent roll so its all gotta b redone b4 i compete again and after the test run last weekend i have a few teething probs suspension and clearence wise 2 sort out b4 i even look like getting it ready 2 compete.

but one things that is sorted is that i gunn goto the local metal land and get hepas of tube and heaps of sheet metal and heaps pf pop rivets and just tie it all down on the back of my tray and paint the hole thing purple/blue/orange/red/grenn and b done with it

FULLY SICK


:lol: :lol: :lol:

Sounds awesome, but you forgot the most important part of any good tube buggy!

ZIP ties! :D
Posts: 830
Joined: Tue Jul 29, 2003 11:29 pm
Location: Newcastle

Post by Old Yella »

hypolux wrote:
POS wrote:HYPO!

The specs for the vehicles is what we are aiming for in the future!!!

For the first comp as long as you have a well built full roll cage, 4 point harness and a winch your rig would be fine!!!!

But then again your full bodied BUS wouldn't stand a chance against some Tube welded together, pop rivets and some purple paint so i suppose there little point of coming up then!! ;) ;) :lol: :lol: :lol: :finger: :finger: :finger: :finger: :finger: :lol: :lol: :lol: :finger: :finger: :lol: :lol: :finger: :lol: :finger: :lol: :finger: :lol:


the way the tray is mounted it wont handle a decent roll so its all gotta b redone b4 i compete again and after the test run last weekend i have a few teething probs suspension and clearence wise 2 sort out b4 i even look like getting it ready 2 compete.

but one things that is sorted is that i gunn goto the local metal land and get hepas of tube and heaps of sheet metal and heaps pf pop rivets and just tie it all down on the back of my tray and paint the hole thing purple/blue/orange/red/grenn and b done with it

FULLY SICK



:rofl: RAINBOWLUX :cool:

you'll have to grow your hair and paint a peace sign on the side :D
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

POS wrote:Sounds awesome, but you forgot the most important part of any good tube buggy!

ZIP ties! :D

heheh yeah hey my full bodied shitter has plenty of them dont u worry

Old Yella wrote: RAINBOWLUX

you'll have to grow your hair and paint a peace sign on the side


heheh true[/quote]
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

hypolux wrote:
POS wrote:HYPO!

The specs for the vehicles is what we are aiming for in the future!!!

For the first comp as long as you have a well built full roll cage, 4 point harness and a winch your rig would be fine!!!!

But then again your full bodied BUS wouldn't stand a chance against some Tube welded together, pop rivets and some purple paint so i suppose there little point of coming up then!! ;) ;) :lol: :lol: :lol: :finger: :finger: :finger: :finger: :finger: :lol: :lol: :lol: :finger: :finger: :lol: :lol: :finger: :lol: :finger: :lol: :finger: :lol:


the way the tray is mounted it wont handle a decent roll so its all gotta b redone b4 i compete again and after the test run last weekend i have a few teething probs suspension and clearence wise 2 sort out b4 i even look like getting it ready 2 compete.

but one things that is sorted is that i gunn goto the local metal land and get hepas of tube and heaps of sheet metal and heaps pf pop rivets and just tie it all down on the back of my tray and paint the hole thing purple/blue/orange/red/grenn and b done with it

FULLY SICK


dude, how long can a diff swap take?

although that tray was sitting on the ground until last weekend, the exact place where we threw it when we took it off the ute :lol: then it took about 4 hrs to have it all bolted down :armsup:

now we need to move the wheel arch back a couple inches, cause its the wrong size, :oops: should look good when its all done though!
hands and mums dont count!!!
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

POS wrote:HYPO!

The specs for the vehicles is what we are aiming for in the future!!!

For the first comp as long as you have a well built full roll cage, 4 point harness and a winch your rig would be fine!!!!


thanks for clearing this up. i read through your rules, and my vehicle failed about 9 points, one of which was the specifically banned beverage container overflow bottle!
i think everyone's rig would fail at least 3 or 4 at the moment? who has braided steering fluid lines?
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

Wendle wrote:
POS wrote:HYPO!

The specs for the vehicles is what we are aiming for in the future!!!

For the first comp as long as you have a well built full roll cage, 4 point harness and a winch your rig would be fine!!!!


thanks for clearing this up. i read through your rules, and my vehicle failed about 9 points, one of which was the specifically banned beverage container overflow bottle!
i think everyone's rig would fail at least 3 or 4 at the moment? who has braided steering fluid lines?


I failed the dress code and the foul mouth code, just sitting here :cry:
hands and mums dont count!!!
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

bj on roids wrote:
Wendle wrote:
POS wrote:HYPO!

The specs for the vehicles is what we are aiming for in the future!!!

For the first comp as long as you have a well built full roll cage, 4 point harness and a winch your rig would be fine!!!!


thanks for clearing this up. i read through your rules, and my vehicle failed about 9 points, one of which was the specifically banned beverage container overflow bottle!
i think everyone's rig would fail at least 3 or 4 at the moment? who has braided steering fluid lines?


I failed the dress code and the foul mouth code, just sitting here :cry:


The DRESS CODE and ALL the other rules are and will be enforced!!! (particularly for you BJ) :finger:

MOST OF THE VEHICLE RULES are in there for future reference and also to help anyone wanting to start building a Buggy!!! There are other bigger and better reasons but they will do for now!!!

Items such as a well built roll cage, 4 point harness, winch etc etc are all mandatory!

IF ANYONE HAS ANY QUESTIONS OR CONCERNS REGARDING A SPECIFIC RULE PLEASE PM ME!!!
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

bj on roids wrote:
hypolux wrote:
POS wrote:HYPO!

The specs for the vehicles is what we are aiming for in the future!!!

For the first comp as long as you have a well built full roll cage, 4 point harness and a winch your rig would be fine!!!!

But then again your full bodied BUS wouldn't stand a chance against some Tube welded together, pop rivets and some purple paint so i suppose there little point of coming up then!! ;) ;) :lol: :lol: :lol: :finger: :finger: :finger: :finger: :finger: :lol: :lol: :lol: :finger: :finger: :lol: :lol: :finger: :lol: :finger: :lol: :finger: :lol:


the way the tray is mounted it wont handle a decent roll so its all gotta b redone b4 i compete again and after the test run last weekend i have a few teething probs suspension and clearence wise 2 sort out b4 i even look like getting it ready 2 compete.

but one things that is sorted is that i gunn goto the local metal land and get hepas of tube and heaps of sheet metal and heaps pf pop rivets and just tie it all down on the back of my tray and paint the hole thing purple/blue/orange/red/grenn and b done with it

FULLY SICK


dude, how long can a diff swap take?

although that tray was sitting on the ground until last weekend, the exact place where we threw it when we took it off the ute :lol: then it took about 4 hrs to have it all bolted down :armsup:

now we need to move the wheel arch back a couple inches, cause its the wrong size, :oops: should look good when its all done though!


hey stoner the axle swap is done :roll: got a few teething probs and dont have time 2 get them done :finger:
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 510
Joined: Fri Mar 26, 2004 7:58 pm
Location: vic

Post by mudtoy »

It probably won't make any difference but one way or another PUOSU highlights will be featured on 4x4 TV.
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

mudtoy wrote:It probably won't make any difference but one way or another PUOSU highlights will be featured on 4x4 TV.


I THINK THIS IS AWESOME FOR OUR SPORT!!!!

Coverage of any kind is better than nothing!

If all goes to plan this event will have Magazine coverage :armsup: , exclusive Video of all the action :armsup: , Segmants on 4X4TV :armsup: and i am going to try and update O/Limits at lunch and close of Competion each day :armsup: :armsup: !!!!!!

Hopefully the action from PUOSU will increase viewer numbers for 4X4TV and hopefully then we can get it here in Brissie and the rest of the country!!

Huge thanks to MUDTOY and 4X4TV!!!!!!!! :)
User avatar
Aza
Posts: 3886
Joined: Thu Dec 12, 2002 4:41 pm
Location: Loganholme, Qld

Post by Aza »

mudtoy wrote:It probably won't make any difference but one way or another PUOSU highlights will be featured on 4x4 TV.


that is awesome, i wish we got it up here in QLD, lucky b@stards them southerners are :bad-words:
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Posts: 510
Joined: Fri Mar 26, 2004 7:58 pm
Location: vic

Post by mudtoy »

Not sure why Bris hasn't jumped at it yet. They got our demo tapes same time as NSW and WA. NSW 31 went down the gurgler and WA said 'shit yeah, we'll air that'.
The PUOSU footage will be awesome though and the vic crew will really freak.
At this stage I have already timetabled 4 segments for PUOSU. Two for highlights and nutso action, one for comp background, set up, organisers, etc and one to highlight competitors rigs (short driver interview and close up look at rig and mods, etc).
Good viewing, great for our sport and top action for us.
Thanks for the invite!
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

beebee wrote:
POS wrote:
No, after beating us at XRCC i have decided your not invited! :lol: :lol: :lol:



Invited or not - I'll be there :finger:

Anybody got any contacts that could assist in getting my vehicle towed down there? I have no trailer or tow vehicle. If there's someone going down with a truck licence maybe I could hire one? Getting sick of driving to and from events and by the sounds of things, the chances of being able to drive home are slim :D


You could spend some time on my lux and it could be finished for tow duties. ;) Dont know how a fresh engine would go pulling a car trailer though. Dont imagine it would normally be a recommended part of running it in. Alternatively if you were to pay for my fuel and entry it could be done in the VL. :shock: .......maybe.
Posts: 269
Joined: Mon Jun 07, 2004 12:54 am
Location: Sydney

Post by X-R-Cist »

Ok there are way too many posts to read, has a date and price been set for this yet?
do spectators pay an entry fee?
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

X-R-Cist wrote:Ok there are way too many posts to read, has a date and price been set for this yet?
do spectators pay an entry fee?


look at the top of the competition and events page, there is a 'sticky' post there with details in it. spectators will only have to pay entry to rover park to watch the event ;)
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

Hybrid wrote:
beebee wrote:
POS wrote:
No, after beating us at XRCC i have decided your not invited! :lol: :lol: :lol:



Invited or not - I'll be there :finger:

Anybody got any contacts that could assist in getting my vehicle towed down there? I have no trailer or tow vehicle. If there's someone going down with a truck licence maybe I could hire one? Getting sick of driving to and from events and by the sounds of things, the chances of being able to drive home are slim :D



You could spend some time on my lux and it could be finished for tow duties. ;) Dont know how a fresh engine would go pulling a car trailer though. Dont imagine it would normally be a recommended part of running it in. Alternatively if you were to pay for my fuel and entry it could be done in the VL. :shock: .......maybe.


Hmmm.......... I wouldn't trust the VL to get 'round the block without assistance let alone get to Tentefield - and that's without towing. :D

In reality, it wouldn't be anywhere near legal. :cry:
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot], Google [Bot] and 44 guests