Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Pajero Diff Ratios?

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 56
Joined: Sat Jun 19, 2004 8:59 pm
Location: Geelong

Pajero Diff Ratios?

Post by lethal weapon »

Does anyone know what the diff ratios for a 94 pajero diesel and petrol are?
GQ 4.2 Turbo Diesel, 4" spring, 2" body, 35" ET2's...etc
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Ok :-

91-95 3.0 V6 = 4.625 or 4.875
94-99 2.8TDI = 4.90
94-99 3.5 V6 = 4.636
The 2.8 & 3.5 diffs are interchangeable the 3.0 V6 has a smaller rear diff.
I just luv my "clacker Jabber"
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Frank

Out of curiosity, how are the two 3.0 diff ratios "distributed"? My SWB has the 4.875, and I recall that most LWB models have the 4.625. Did the GL N/A Diesel have the same rear diff as the 3.0 SWB?

Cheers,

Scott (too lazy to walk out to his car to find his manual :? )
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

For the NH :-
3.0 V6 / 2.5 TDI swb & lwb GLS = 4.875
3.0 V6 GLX = 4.625
2.5 TDI GLX = 4.875
2.6 / 2.5 TD GL = 4.875
For the NJ :-
3.0 V6 GL / GLX / GLS lwb = 4.625
3.0 V6 swb GLS = 4.875
2.8 diesel GL = 4.875
All of these models had the 9" rear diff.
I just luv my "clacker Jabber"
Top
Posts: 74
Joined: Tue Nov 02, 2004 4:04 pm
Location: Novosibirsk, Russia

Post by MKarmyshev »

Bitsamissin wrote:For the NH :-
For the NJ :-
3.0 V6 GL / GLX / GLS lwb = 4.625
3.0 V6 swb GLS = 4.875
2.8 diesel GL = 4.875
All of these models had the 9" rear diff.

Does anybody know diff ratio and size for '94 2.8TDI SWB A/T (V26, Japanese spec) ?
I found conflicting data-it is either 4.900 or 4.636.
It would be also great to know rear diff size and shaft diameter. Is it 30.5mm or 35mm?
Thanks for any help!
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Hi Mike, I checked my Japanese CAPS programme and no wonder you are confused.
There are 3 x swb 2.8 TDI's listed :-

- V26C (swb canvas top) = 4.90 diffs
- V26W (swb metal top) = 4.636 diffs
- V26WG (swb metal top, wide body) = 4.636 diffs

Both the 4.636 & 4.90 diffs are 9.5" rear and run the larger axles 33.5mm.
I just luv my "clacker Jabber"
Top
Posts: 74
Joined: Tue Nov 02, 2004 4:04 pm
Location: Novosibirsk, Russia

Post by MKarmyshev »

Bitsamissin wrote:Hi Mike, I checked my Japanese CAPS programme and no wonder you are confused.
There are 3 x swb 2.8 TDI's listed :-

- V26C (swb canvas top) = 4.90 diffs
- V26W (swb metal top) = 4.636 diffs
- V26WG (swb metal top, wide body) = 4.636 diffs

Both the 4.636 & 4.90 diffs are 9.5" rear and run the larger axles 33.5mm.

Hello Bitsamissin,
Many thanks for taking a look!
Now its clear but I am getting metal top anyway-sometimes it's quite cold here. :D
That's great that it uses larger diff & axles, because I plan to run 35s for a while without any drivetrain mods until I can afford SAS.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest