Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Chopping Guards

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 45
Joined: Tue Jun 15, 2004 9:33 pm
Location: Gold Coast, Australia

Contact:
Contact mud_patrol

Chopping Guards

Post by mud_patrol »

I've heard a lot of you guys talking about chopping your guards to fit bigger mud movers...
...how.... where.... front.... rear....

Please enlighten me.. :oops:
Arguing over the internet is like running in the Special Olympics...
...Even if you win, you are still retarded!

A good friend will bail you out of jail... But a true friend, will be sitting next to you saying, "Damn...that was fun!"
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

Im going to chop my guards where i think its spose to be i will take photo's to show where im going to cut
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 130
Joined: Mon Jun 30, 2003 12:44 pm
Location: Melbourne

guard cut

Post by davejb »

Some pics of my rear guards during cutting. Trim the plastic mould at the front of the rear guards, control arm spacers on the front radius arms and 34inch jt2's fit without rubbing

http://www.outerlimits4x4.com/PHP_Modul ... vejbss+mav

Dave
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

http://www.outerlimits4x4.com/PHP_Modul ... 0&start=40



some pics here of my front guard chop ...
u can see where i chopped and stuff .. also folded a new lip on them
last pic on the page is a good view on the truck with 35z .. they look tiny
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

i cut mine while they were on the car. just pull out the plastic inner guard, tape guard so paint dosen't scratch mark out 10mm too small. cut then work backwards and fowards bending the edge more and more each time with multigrips or a shifter, till even and round. touch up, or as i did cover with a shite load of rustproofer, and install black flare rubber. there are two sorts of rubber one thet bolts vertically and one thet bolts horizontally. get the horizontal one. i needeed it for my 15 x 10's with 35.s, and needed to widen it with a strip of rubber for my 38.5's

cheers

bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 4 guests