Dumb newbie Rangie vent question

[N*A*M]

Hey dudes

Got a really basic question that I can't answer because the interior went up in flames.

Basically, the heater unit has plastic fittings with match with the flexible air hose. However, going up to the top of the dash, I have four round vents with a much bigger diameter. Am I missing a coupling to connect the air hose to the round vent grills?

Also, do you think a centre console is required for roadworthy? I have a t-bar auto that is basically bare. Centre consoles are $$$!

Nam

[Loanrangie]

Nam, you will need the vent inner fitting that is riveted to the top grill, this has smaller diameter end which will match the outputs of the heater box.
As for the console i doubt it would be needed but it would be easy enough to knock one up with some ply and pine covered in carpet.

Nick.

[GRIMACE]

Nam i need some cash and have started wrecking my older rangie, do you care about the quality of the centre console ? ? ?

The one in its not to bad, I need some cash cause you may or may not already know I broke my rear passenger shock and its an expensive one.
If you are interested pm me and I will see if i can get you some pics, or you could ask ruff what sorta condition he thought it was in as he has seen it.

Cheers
Anthony


About the vent thingame bobbies I think Rod dirte might be taking the whole dash but once again ask ruff to look at this thread and if they dont want them thing your talkin bout you can take them to

Sorry bout the seatbelts though, there farked

[N*A*M]

anthony

i already spoke to tony a few days ago and he mentioned your plans

post some pics show show me what you got

[GRIMACE]

nam i got some picture with my mums dodgy cam I had to use it on an extension lead as we are so budget and dont have any spare batterys


Crap the pictures are to many Kbs
Pm Me your email and I will email them directly to you

[Thonger]

NAM don't want too hijack too much but as you had the dash apart anyway can you confirm if the return line from the aircon aircooler in the dash is feeding from the top. Looking to use mine as an aircooler, oil/water trap for on board air.

[Bush65]

NAM, I think I have some of those vent parts you are missing. I can check on weekend and if you still need them I can drop in the mail if you pm an address.

[N*A*M]

sorry dude i can't tell you. it was all melted when i pulled it out.

all i know is it's a heavy mofo and i would much rather throw it at ricers.