With having lights and winch on the front, it sags heaps and is not overly balance. Currently got 5 inch lift front and rear. Does anyone have any ways to improve the balance, Was thinking doing 6 inch lift in the front???
Help needed cheers!
eddie
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Suspension sag!
With my shorty im runnin 5" springs in da front with a 10mm ome coil spacer and im runnin 4" springs in da rear and it still dont sit level still sittin down in the front not much but enough to be noticeable ..............
Im also runnin custom front bar it duz weigh a bit spottys and 8000lb low mount duz also have dual batts and shite which duz contribute
check how much its sittin down in the front might just need some coil spacers cheap way if its within 30-35mm if not like u say just get a bigga coil to suit or just do like i did lower the rear to suit
A1
Im also runnin custom front bar it duz weigh a bit spottys and 8000lb low mount duz also have dual batts and shite which duz contribute
check how much its sittin down in the front might just need some coil spacers cheap way if its within 30-35mm if not like u say just get a bigga coil to suit or just do like i did lower the rear to suit
A1
[b][i] DAN [/i] [/b]
:silly:
:silly:
Re: Suspension sag!
2HI4U wrote:With having lights and winch on the front, it sags heaps and is not overly balance. Currently got 5 inch lift front and rear. Does anyone have any ways to improve the balance, Was thinking doing 6 inch lift in the front???
Help needed cheers!
eddie
So this means you aren't 2HI4Us any more hey
Nah, serious I have a wizard 7" kit, 3" body lift and she sits level all round. I have ARB deluxe winch bar, 9000lb low mount, 2 cibbie super oscars, 2 IPF's and dual batteries.
No dramas at all.
Go the wizard kit and GO BIGGER
2HI4U
Cheers
Linc
[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Linc
[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Hey there 81gq,
What size tyres do you run????
The reason I ask is that I am desperately seeking a measurement to find out what sort of lift my truck has in it.
Do you reckon you would be able to take a tape measure to your beast at some time?
Maybe just measure from the ground up to thru the wheel centre line to the bottom of the lip on the front guard???
I am spose to have about 6" lift with 2" body lift but am sure it is nowhere near this.
Would really help me out if ya could
Cheers
Brian.
What size tyres do you run????
The reason I ask is that I am desperately seeking a measurement to find out what sort of lift my truck has in it.
Do you reckon you would be able to take a tape measure to your beast at some time?
Maybe just measure from the ground up to thru the wheel centre line to the bottom of the lip on the front guard???
I am spose to have about 6" lift with 2" body lift but am sure it is nowhere near this.
Would really help me out if ya could
Cheers
Brian.
Who is online
Users browsing this forum: No registered users and 0 guests