wheel bearing sockets

Post by **L,C 60** » Mon Jul 05, 2004 10:21 pm

dose anybody know what size socket is used on an BJ73 front whel bearing locking nut.
are all the toyota ones the same size.
i think they are 55mm but not sure

Post by **4sum4** » Mon Jul 05, 2004 10:36 pm

I use 2-1/8" for luxes

Post by **ORSM45** » Mon Jul 05, 2004 11:09 pm

yeah 54-55mm i think. will measure tomorrow. (i made my own with a lazer cutter then welded it to an old socket.)

Post by **L,C 60** » Mon Jul 05, 2004 11:28 pm

hope its 55, cant get a 54 or 3-4 days

Post by **spazbot** » Tue Jul 06, 2004 5:11 pm

luxs 60s 40s are all 54mm
if you dont wanna buy a tube socket, use a screw driver and tap the nut off

Post by **Raymond Spackman** » Tue Jul 06, 2004 6:00 pm

Was at DON KYATT 4WD SPARE PARTS today & they had sockets made for these. front & rear were diffrent sizes. 1 was $27 & the other was $37. You can find thier add in 4WD MONTHLY. They have 1 in most states.

Post by **ORSM45** » Tue Jul 06, 2004 7:35 pm

spazbot wrote:luxs 60s 40s are all 54mm
if you dont wanna buy a tube socket, use a screw driver and tap the nut off

i really dislike this method. as it stuffs the nut and then my socket doesnt fit on :cry:

Post by **L,C 60** » Sat Jul 10, 2004 5:10 pm

383FJ45 wrote:
spazbot wrote:luxs 60s 40s are all 54mm
if you dont wanna buy a tube socket, use a screw driver and tap the nut off

i really dislike this method. as it stuffs the nut and then my socket doesnt fit on

i agree as to why i am looking for the socket, found out they are all 55mm

Outer Limits 4x4 Board

wheel bearing sockets

wheel bearing sockets

Who is online