Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2 LT motor

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 11
Joined: Wed Jun 23, 2004 8:42 pm
Location: Adelaide, South Australia

2 LT motor

Post by Punani »

hey all i have just bought a turbo desel bundera and im doing the first service on it does anyone know how much oil these things take? how much is the oil filter? does anyone know where i can dowload or buy a workshop manual for it? thats for ya help! :)
Posts: 145
Joined: Fri Jan 10, 2003 8:34 pm
Location: Ringwood, Melbourne

Post by Maddog »

2lt takes about 4.5 litres....oil filter is a Z9....manuals can be bought at Kmart, Autobarn....
Always late in a 2.8
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

Oil filter should be about $5 from kmart/repco etc. Use a decent oil like Penrite HPR Diesel and you should be sweet and make sure you change it every 5,000km!.

My 2L Engine uses 7 litres of oil, so check with you handbook first.. id doubt the sump size would be any different as they are the same engine, yours is just turbo..
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 314
Joined: Tue Nov 25, 2003 3:43 pm
Location: Sunny Coast

Post by BundyMonkey »

The Oil Filter is not a Z9. I got lead to believe that when I went to purchase one when I did my 1st Service on mine, Its what the catelogues say in the shops. I got home drained the oil to find out that it isnt a Z9. Lucky I was able to call someone to pick a correct filter up for me. Cant remember which one it is but costs bout $25. And they do take about 4.5 L of oil
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

Hey
Oil filter should be a Z334 can use ryco or many other brnds i use osaka seems to help keep oil pressure and things better.
i rekn the 2lt would use more that 4.5L mine uses 6.8L and me nate has a 2.4t and uses the same just check dont wanna run out of oil.
Penrite oil is the best try using japantruck 15 from penrite its very good for cleaning and helps the truk run smooth done 35000ks using it reduces blowby and seems to give a bit more power.
Bull
Posts: 434
Joined: Mon Apr 19, 2004 2:50 pm
Location: Tweed Coast

Post by I.M.P.O.S.E »

Mine is a Z9!
Posts: 145
Joined: Fri Jan 10, 2003 8:34 pm
Location: Ringwood, Melbourne

Post by Maddog »

I changed my oil last week...I know I put a Z9 on it and I know I still have some oil left in the 5 litre oil container I bought.
Always late in a 2.8
User avatar
mtx
Posts: 87
Joined: Fri Aug 01, 2003 3:23 pm
Location: Brisbane

Post by mtx »

2Lt takes 7.5ltrs oil. They like the Penrite HPR Diesel.
The correct Oil Filter for it is generally the Z334 ( Around the $30 mark)

If you need further information on the motor go to
www.toyotasurf.asn.au/forum

Same motor in the early Surfs.
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

Guys
Just looked around and some of the earlier 2lts did come with a z9 filter others z334 have a different cappacity in oil amount also but i didnt find out how much.
Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests