Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

front demister

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 269
Joined: Mon Jun 07, 2004 12:54 am
Location: Sydney

front demister

Post by X-R-Cist »

I have a 90 model pathfinder which needed the windsheild replaced. After several attempts by o'brien to find the correct windsheild for my car they finally managed to get the correct size one but it was still the incorrect one for my model. This one came with a front demister and a little cable that popped out of the glass and snuck under my dash. I connected it to the rear demister thinking it may work but i cannot get it to work.

Does the front demister need a seperate circuit or relay or something to make it work? or am i just connecting it wrong?
I connected it to the positive of the read demister switch.

Any ideas?
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

you don't have an import model windscreen do you?

the d21 navara windscreen should be the same as your pathy screen and should work fine without an electric demister??? :?
Top
Posts: 269
Joined: Mon Jun 07, 2004 12:54 am
Location: Sydney

Post by X-R-Cist »

no ideas mate, all i know is they came out 4 times cos they couldnt figure out which model i have, after me telling them the whole 4 times it was a 90 DX pathy. They guy told me it was from the model above mine but didnt specify which one.

keep in mind tho that mine isnt an import and it originally doesnt come with any front demister, infact i looked over the manual as it covers other series pathy's and theres nothing in there about front demisters
Top
Posts: 86
Joined: Sat Nov 08, 2003 2:02 pm
Location: yarrawonga northen victoria

Post by buger man »

itmust have two wires not just one there isn't one on the other end is there :?
2001 pathfinder tjm(nissan ) alloy b/bar hella 160 d/lights ARB h/light loom , ipf d/light loom GME TX3400 UHF , 2 power outlets in back

www.yarrawongamulwala.com.au
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

:?
Last edited by bazzle on Mon Jul 19, 2004 10:30 am, edited 1 time in total.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Sounds more like an EMBEDDED aerial for the radio.

Nissan use these on some models..

Bazzle :P
Top
Posts: 269
Joined: Mon Jun 07, 2004 12:54 am
Location: Sydney

Post by X-R-Cist »

nope only the one wire, i saw the thing go in and there was only one. You can even follow it back and it comes out at one end.

Extension for the arial? in the windsheild?? wtf?
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

X-R-Cist wrote:nope only the one wire, i saw the thing go in and there was only one. You can even follow it back and it comes out at one end.

Extension for the arial? in the windsheild?? wtf?


Discos and Range Rovers have those too ususally
use the demister on the rear windscreen as a demister and an aerial.

Tom
Top
Posts: 150
Joined: Wed Mar 10, 2004 7:02 am
Location: Newcastle

Post by CB0569 »

Ive seen some imported cars that have come in from Japan. We use AM & FM over here but in Japan they use MW (My 96 Navara had the MW frequency on its standered radio) which they use the aerial in the front windscreen to use this frequency.Doesnt work over here unfortunatly cause if they did the outside aerial wouldnt get broken in the bush.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Nissan use windscreen aerials on a lot of vehicles.
My Prev Mav had one. One wire bottom L/H corner.

Bazzle
Top
Posts: 376
Joined: Mon Mar 22, 2004 8:31 pm
Location: Victoria, Outer eastern

Post by berazafi »

some windscreens use a hotwire to glue them in place, they connect them to a powersupply and it melts the rubber, that was a 79 mazda capella that had one maybe is just that, does it have a termination, is it an insulated wire. if it is a bare wire with no insulation or terminal i susspect it is the hotwire
Top
Posts: 269
Joined: Mon Jun 07, 2004 12:54 am
Location: Sydney

Post by X-R-Cist »

ok now that i read more and more it seems to be an aerial...lol i cant believe i connected an aerial to my demister! that might explain why its not working.

No the wire seems to be a copper wire coated in something, runs round the bottom of the windsheild and up the middle right up to the top. It stops about 2 inches before it reaches the edge of the windsheild.

oh well better disconnect it now :oops: :oops:

Thanks for the tips guys
Top
Posts: 669
Joined: Wed Sep 17, 2003 11:29 am
Location: Sydney

Post by Croz »

:rofl: @Owen!!!


Hehehe!!

Cant wait till we do some super cold driving and he turns on the radio real loud to de-fog the front windows!!

My Feroza has a special aerial outside the car that makes a forcefield that keeps the whole car defogged... but it's not working right now... :D
On boooooost!!
Top
Posts: 269
Joined: Mon Jun 07, 2004 12:54 am
Location: Sydney

Post by X-R-Cist »

Croz wrote::rofl: @Owen!!!


Hehehe!!

Cant wait till we do some super cold driving and he turns on the radio real loud to de-fog the front windows!!

My Feroza has a special aerial outside the car that makes a forcefield that keeps the whole car defogged... but it's not working right now... :D


smartass!
somehow i think that this story will be brought up around any campfire we happen to share :oops:
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 8 guests