Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

removal of ecu

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 10
Joined: Thu Jun 24, 2004 6:56 pm
Location: sydney-west

removal of ecu

Post by bugz »

ok in "ecu diagram" you said to rip out the ecu and put a full mechanical pump in, is that all i have to do or is there more involved? the engine is a 2.4ltr turbo diesel from a 1993 hilux surf and is going into bunderra 1985 model with standard g52 manual box i've been told i need to change bellhousing and flywheel and pressure plate as i'm changing from petrol to diesel. that i understand. what i dont understand is how the injectors are going to work without a ecu to instruct them any comments greatly appreciated.
Top
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

I think the ECU only controls the pump (cold running, Max fuel, ect) The injectors may still be of mechanical type.....Check the injectors on the engine that the pump is off and see if they are the same...
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

yes what Dazz said, the ECU in those setups only controls the fuel pump, the injectors are still the old school mechanical type.
Free air locker to the first 20 callers!
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests