Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

CLUTCH PROBS in 1st gen 308 lux

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

CLUTCH PROBS in 1st gen 308 lux

Post by Webbie »

Got my lux back in the shed as this is cause after driving it 4-5 times i lost my clutch.I thought may have been that i had a leeky slave or line but it was neither so i replaced the slave anyway but now, i cant disengage the clutch unless the car is switched off or i lose all my freee play any eyedear :idea: :? BTW ive check the bleeding and also put a ln106 master on but no good :bad-words: :bad-words: :bad-words: PLEASE help or the f@cking box will have to come out.ALSO would a longer bearing carrier work. :?: :roll:
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Posts: 349
Joined: Tue Nov 12, 2002 5:40 pm
Location: Central Coast NSW

Post by hophoar »

What size slave cyclinder you using. Had the same problem setting up V6 Commodore and I needed to sleeve the slave down to 5/8(I think ) to get the travel to relesae the clutch fully.

John
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests