i had my 110 dfnd serviced today and my muffler has BIG holes in it. so its either replace or up grade. i did a search but didn't find much tech on exhausts( other than upgrade the intercooler insted). i spoke to taipan xp down from my mechanic's and they can do a VORTEX exhaust and 3inch system and is very confident i will get power gains. the vortex is a local design and is ment to actually suck the gases out. i'm thinking mabe like a hyclone. but this is my guess as he didn't want to give to much away. his work does look pretty good. welds etc. so what design principels should i look for, what makes a good exhaust for a turbo deisel.
cheers, serg
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
new exhaust 300tdi
Moderator: Micka
I just re-did the exhaust on my 110 TD5...
Now its a 3" mandrel bent system with 1 small straight through 3" stainless box mid mounted.
Love it
Sounds great, spools faster (although you can now hear the turbine out the exhaust at low revs)
And on a hill where I used to be forced to shift to 4th I can now climb in 5th..
Dont go fancy, just straight through, the turbo keeps it quiet.
Now its a 3" mandrel bent system with 1 small straight through 3" stainless box mid mounted.
Love it
Sounds great, spools faster (although you can now hear the turbine out the exhaust at low revs)
And on a hill where I used to be forced to shift to 4th I can now climb in 5th..
Dont go fancy, just straight through, the turbo keeps it quiet.
Landrovers... Nothing else comes close!
had a mate go 3" off the turbo housing on a 300tdi, made a world of difference!
gave more torque in gear, made the car more driveable.
just 3"mandrel bends 3"straight through muffler.
got a bit drummy in the back of the 110 so he ended up putting a 3"straight resonator in (looks like the old fashioned hot dog muffler)
exhaust shop did it for free
the resonator dropped the excess noise and did't effect power at all.
when i drove it i noticed that you could hold a gear up hill instead of dropping a gear. i guess this means it holds onto boost better because the exhaust breathes more efficiently.
david
gave more torque in gear, made the car more driveable.
just 3"mandrel bends 3"straight through muffler.
got a bit drummy in the back of the 110 so he ended up putting a 3"straight resonator in (looks like the old fashioned hot dog muffler)
exhaust shop did it for free
the resonator dropped the excess noise and did't effect power at all.
when i drove it i noticed that you could hold a gear up hill instead of dropping a gear. i guess this means it holds onto boost better because the exhaust breathes more efficiently.
david
you can check out these mufflers at www.nutech2000.com/prod10.htm after doing a search on general 4x4 tech, it seems alot of guys are running 3 inch mandrel bent with NO mufflers. the guy i spoke to quoted $1400 for a 3 inch mandrel bent mild steel with the vortex exhaust, i'm thinking that this is pretty expensive. i haven't had a chance to compare yet. Ben i noticed you have replied about other exhausts, so whats your opinion
cheers, serg
cheers, serg
Who is online
Users browsing this forum: No registered users and 44 guests