hi guys,
having so many problems with operating my spots via the highbeam (previous thread) i have decided to take them off for the RW. i have plans to just wire the damn things up to the battery with a switch in the dash. the highbeam on these FJ40's are crap anyway.
i was wondering if anyone knew of a foot switch that i could put in the floor to work the spotties. i seem to remember driving a car that had this.. might have been back in the UK, im not sure..
and thoughts or comments??
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
foot switch
Moderator: -Scott-
foot switch
ohhhhh shite... it really didnt look that deep!
i know the switch your talking about. its the dip (hi/low) switch.
my brothers jeep has one, and so does my XP falcon.
whats so hard about wiring through the hi beams?
all you need is speaker wire and a switch.
run the wires from the common and hi beam wires on the back of the drivers side light, run 1 of those wires to a switch in the cab, then to the relay.
my brothers jeep has one, and so does my XP falcon.
whats so hard about wiring through the hi beams?
all you need is speaker wire and a switch.
run the wires from the common and hi beam wires on the back of the drivers side light, run 1 of those wires to a switch in the cab, then to the relay.
foot switch
ok, these FJs are wired strange.. power goes to both high and low even when just on low.. therefore the spots are always powered...
like the idea of the foot switch... might look into the XP falcon... should i be looking for a particular year?
like the idea of the foot switch... might look into the XP falcon... should i be looking for a particular year?
ohhhhh shite... it really didnt look that deep!
Re: foot switch
Mechman wrote:ok, these FJs are wired strange.. power goes to both high and low even when just on low.. therefore the spots are always powered...
like the idea of the foot switch... might look into the XP falcon... should i be looking for a particular year?
most likely yours is negativly switched
foot switch
i think its switched by aliens in another dimention... maybe from a parallel universe... anyway, i have given up on the thing...lol
ohhhhh shite... it really didnt look that deep!
if you run a wire from the common wire and a wire from the hi beam wire.
it shouldnt matter if its negative switched or not. there is a 12V difference between the 2 wires therefor the coil in the relay will energise. add a switch to one of your new wires (in the cab, on the dash or whatever) this breaks the circuit, turning the spots off.
it shouldnt matter if its negative switched or not. there is a 12V difference between the 2 wires therefor the coil in the relay will energise. add a switch to one of your new wires (in the cab, on the dash or whatever) this breaks the circuit, turning the spots off.
Who is online
Users browsing this forum: No registered users and 0 guests