Mine goes into ARB on Monday, tkae 2 days they reckon
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hey Ado , your locker in yet.......
Moderator: -Scott-
Hey Ado , your locker in yet.......
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
WIll be interested in where they place your compressor Ian. I pulled the compressor out of my old car and was just going to give it to them to install along with the locker, but seeing as I have just bought a winch and bar I'll be putting the locker off for a little while.
So will just mount the compressor for now.
Rob
So will just mount the compressor for now.
Rob
96 Paj 2.8 TD 2" lift, Snorkel, LR Tank, Dual Batt, winch, 32 MTRs, RT tent and rack, polyairs etc
Ian
Yeh - my locker is nearly in - the ARB bloke is battling with it now!!!!
Installing it gave rise to a question..., the Auto diff disconnect in the Pajeros only disconnects one axle which means that when you're hooning along in 2WD your front diff planetry gears are doing a zillion revs - the mechanic and I can't figure out how the diff hangs together.
Its the same as having a 'cruiser with one free wheeling hub in and one out - which in the Toyota usually results in the diff sh*tting itself
the mitsi diff must be a ripper to hang together under these conditions
I hope that ARB considered this when designing the locker!!!
also whats the point of the ADD system? it only stops the fron prop shaft from spinning in 2WD???
Ado
Yeh - my locker is nearly in - the ARB bloke is battling with it now!!!!
Installing it gave rise to a question..., the Auto diff disconnect in the Pajeros only disconnects one axle which means that when you're hooning along in 2WD your front diff planetry gears are doing a zillion revs - the mechanic and I can't figure out how the diff hangs together.
Its the same as having a 'cruiser with one free wheeling hub in and one out - which in the Toyota usually results in the diff sh*tting itself
the mitsi diff must be a ripper to hang together under these conditions
I hope that ARB considered this when designing the locker!!!
also whats the point of the ADD system? it only stops the fron prop shaft from spinning in 2WD???
Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Ian
Yeh - my locker is nearly in - the ARB bloke is battling with it now!!!!
Installing it gave rise to a question..., the Auto diff disconnect in the Pajeros only disconnects one axle which means that when you're hooning along in 2WD your front diff planetry gears are doing a zillion revs - the mechanic and I can't figure out how the diff hangs together.
Its the same as having a 'cruiser with one free wheeling hub in and one out - which in the Toyota usually results in the diff sh*tting itself
the mitsi diff must be a ripper to hang together under these conditions
I hope that ARB considered this when designing the locker!!!
also whats the point of the ADD system? it only stops the fron prop shaft from spinning in 2WD???
Ado
Yeh - my locker is nearly in - the ARB bloke is battling with it now!!!!
Installing it gave rise to a question..., the Auto diff disconnect in the Pajeros only disconnects one axle which means that when you're hooning along in 2WD your front diff planetry gears are doing a zillion revs - the mechanic and I can't figure out how the diff hangs together.
Its the same as having a 'cruiser with one free wheeling hub in and one out - which in the Toyota usually results in the diff sh*tting itself
the mitsi diff must be a ripper to hang together under these conditions
I hope that ARB considered this when designing the locker!!!
also whats the point of the ADD system? it only stops the fron prop shaft from spinning in 2WD???
Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Ian
Yeh - my locker is nearly in - the ARB bloke is battling with it now!!!!
Installing it gave rise to a question..., the Auto diff disconnect in the Pajeros only disconnects one axle which means that when you're hooning along in 2WD your front diff planetry gears are doing a zillion revs - the mechanic and I can't figure out how the diff hangs together.
Its the same as having a 'cruiser with one free wheeling hub in and one out - which in the Toyota usually results in the diff sh*tting itself
the mitsi diff must be a ripper to hang together under these conditions
I hope that ARB considered this when designing the locker!!!
also whats the point of the ADD system? it only stops the fron prop shaft from spinning in 2WD???
Ado
Yeh - my locker is nearly in - the ARB bloke is battling with it now!!!!
Installing it gave rise to a question..., the Auto diff disconnect in the Pajeros only disconnects one axle which means that when you're hooning along in 2WD your front diff planetry gears are doing a zillion revs - the mechanic and I can't figure out how the diff hangs together.
Its the same as having a 'cruiser with one free wheeling hub in and one out - which in the Toyota usually results in the diff sh*tting itself
the mitsi diff must be a ripper to hang together under these conditions
I hope that ARB considered this when designing the locker!!!
also whats the point of the ADD system? it only stops the fron prop shaft from spinning in 2WD???
Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Ado, mine is IN,.
anyway I did think about the problem you raised. what happens if you try to engage the locker whislt the vehicle is only in 2Wd??
that could be overcome IMO by powering the ARB locker relay from an active off the dash lights in the speedo console, ie the locker would only work if the vehcile is in 4wd.
problem though when the dash lights flash (as they often do) that would mean it would be switching the ARB relay on & off until the lights stop flashing>
I really dont know about this one , maybe Frank can help
cheers
anyway I did think about the problem you raised. what happens if you try to engage the locker whislt the vehicle is only in 2Wd??
that could be overcome IMO by powering the ARB locker relay from an active off the dash lights in the speedo console, ie the locker would only work if the vehcile is in 4wd.
problem though when the dash lights flash (as they often do) that would mean it would be switching the ARB relay on & off until the lights stop flashing>
I really dont know about this one , maybe Frank can help
cheers
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
Who is online
Users browsing this forum: No registered users and 1 guest