Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rear disc brakes on gen1s
Moderator: -Scott-
Rear disc brakes on gen1s
Hello everyone, I am from 4x4wire. Over here in the US we did not get disc brakes on out gen1s. Does anyone know if they are the same as the gen2? What pieces would be needed to convert mine? Were the axle shafts different? Would the parts be easy to find in a wrecking yard? How much? Would anyone be wiling to ship the stuff to me? Does anyone have pics? Thanks in advance.
91Montero, 93Montero, 84Toyota PU on 36s, 73Toyota LC, 3 flooded 4x4 from Hurricane Katrina.
Yeah I think the Gen 1 & Gen 2 rear disc brakes are different.
I think the Gen 1 parking brake works on the calipers instead of having an internal drum like the Gen 2 ???
However the standard parking brake cable should work on either.
You will need to buy the whole axle as the backing plate is located by the pressed on wheel bearing, disc rotors and calipers.
The Gen 2 axles are slightly longer than a Gen 1 so one option is to cut down a Gen 2 set of axles so they will fit snuggly into your Gen 1.
You guys get parts from wreckers way cheaper than us so to get the axles cut down a tad and resplined would be cheaper than shipping all this over to the US.
Hope this helps.
I think the Gen 1 parking brake works on the calipers instead of having an internal drum like the Gen 2 ???
However the standard parking brake cable should work on either.
You will need to buy the whole axle as the backing plate is located by the pressed on wheel bearing, disc rotors and calipers.
The Gen 2 axles are slightly longer than a Gen 1 so one option is to cut down a Gen 2 set of axles so they will fit snuggly into your Gen 1.
You guys get parts from wreckers way cheaper than us so to get the axles cut down a tad and resplined would be cheaper than shipping all this over to the US.
Hope this helps.
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 1 guest