Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

WHO's sleaved their slave cylinder ?????

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

WHO's sleaved their slave cylinder ?????

Post by Webbie »

Having probs with clutch so im gunna sleave the slave to get more throw, i've herd this works well .Going from 3/4 to 11/16 .any comments are good. :roll: :idea:
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

standard procedure for a chev to GQ,helps the clutch to clear.
GQs are prone to wear in the pedal / pushrod bush area.
Adjust your pedal height to gain max travel.
J Top
Top
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

sleve

Post by humphey »

hi bud , i just fitted a v8 ford to me 60 series with a h/d clucth and could'nt get enough peddle to fully disengage the clutch so i sleved it down to 5/8 size from 13/16th .works great but a bit heavy on the foot . 11/16 will work fine .
Top
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

sleave

Post by Webbie »

Thankx boys going 5/8 from 3/4 $50 plus the piston hope it works.
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests