Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gearbox question - 253 in FJ40

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 172
Joined: Sun Oct 26, 2003 12:46 pm
Location: Kallangur

gearbox question - 253 in FJ40

Post by Mechman »

Hi guys
i have a 253 red motor in my FJ40. i didnt put it in myself and as i am not from australia i have no idea what it would have come from or where the 4 speed gerabox did. i am having some strange noises from the box and im thinking its a bearing, but as i dont know what is it is a bit hard to to know what to do.
can anyone tell me how i can find this out?.. is there a common car these motors came from? a number on it perhaps that will give me a clue?

also, is it worth reparing or just getting another gearbox to put in?


cheers.
ohhhhh shite... it really didnt look that deep!
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

it's probably the factoy toyota gearbox with an adaptor bellhousing mating it to the 253. while not exactly a dime a dozen the gearboxes are fairly cheap and plentiful especially if you just want to replace it with another 4 speed, should be able to pick one up from a wrecker for $500 give or take a bit - or put an ad in the wanted section of the bb, someone might have one they want to get rid of. There will be someone on this boartd who lives near you who can eyeball it for you.


cheers

Brian
Free air locker to the first 20 callers!
Posts: 481
Joined: Fri Jan 16, 2004 2:42 pm
Location: WA

Post by the_smoo »

you want to find out if its a toyota box first..

post a pic and you will soon find out from someone off here :)

i can help you out with engine numbers/identification if needed...
now in Perth
Posts: 172
Joined: Sun Oct 26, 2003 12:46 pm
Location: Kallangur

gearbox

Post by Mechman »

here is a pic, best i can manage. I think its of the gearbox...hahahaha :oops:
ohhhhh shite... it really didnt look that deep!
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

looks like it could be the factory H41 4 speed, some of them came with the SAE style six bolt PTO port like that. some more photos like that from underneath but from different angles, including from fornt and rear, will give more clues.

what year is the truck? what does it say on the build plate next to "trans/axle"?


cheers

Brian
Free air locker to the first 20 callers!
Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests