Hey, I was just wondering on peoples opinion on fitting 7.50/16s under a stock Disco? I've got a set of old olympic steeltreks kicking round, that I'm thinking about mounting up as the bush tyres (the stock 205/80s are shite- bugger all diff clearance). but I just want to know they'll clear the guards first.... Anybody have any experience upsizing tyres on a S1 Disco?
If not the 7.50s what then??
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Stock S1 Disco- 7.50/16 tyres?
Moderator: Micka
In fact the common 31' x 10.5 will be too big!
We put them on a stock 4 door and they rubbed every where.
Even with raised springs 764 Rear/stock rears in the front they still rubbed on the rear of both the front and rear body panels. Had to cut a bit out [not much] you could neatly fold some around - but neat isn't my game
I think the 10.5's are just to wide - might get away with the height on a narrower tyre...
A friend has 32's on a stock disco with taller springs AND a body lift! Too much work for 32" tyres - its just not worth it...
Bodge says - cut the panels
We put them on a stock 4 door and they rubbed every where.
Even with raised springs 764 Rear/stock rears in the front they still rubbed on the rear of both the front and rear body panels. Had to cut a bit out [not much] you could neatly fold some around - but neat isn't my game
I think the 10.5's are just to wide - might get away with the height on a narrower tyre...
A friend has 32's on a stock disco with taller springs AND a body lift! Too much work for 32" tyres - its just not worth it...
Bodge says - cut the panels
Cheers fellas!
Yeah, it seems the width is the big issue. that's why the 10.50s dont' go well. I did a bit of looking, and found that 7.50, (or the metric equiv of 235/85R16) will need a bit of trimming of the rear arch....
info from disco web on the topic
(Oh, it's a 4 door)
Yeah, it seems the width is the big issue. that's why the 10.50s dont' go well. I did a bit of looking, and found that 7.50, (or the metric equiv of 235/85R16) will need a bit of trimming of the rear arch....
info from disco web on the topic
(Oh, it's a 4 door)
It was my knowledge that the Camel Discos had 7.50x16 tires, Michelin X series to be exact, and that was done by a smallish lift of HD LR springs to cope with the weight and shaving the rear quarters a bit.
I am planning on putting some 7.50x16 Michelin XS on one of my Discos that is currently stock...will revert back to you ASAP
I am planning on putting some 7.50x16 Michelin XS on one of my Discos that is currently stock...will revert back to you ASAP
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
I have been told (by someone who should know) that 7.50's (provided they are on a rim with the right offset) will just fit on a std rangie without trimming/lifting, so the same should apply to a disco. Remember that 235's are over 2" wider than a 7.50.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Yeah,
I think that any 7.50x16 tire can fit on either the RR/Disco with a stock offset wheel and a wee bit of trimming to the rear quarter panels on Discos...
Will confirm soon...
I think that any 7.50x16 tire can fit on either the RR/Disco with a stock offset wheel and a wee bit of trimming to the rear quarter panels on Discos...
Will confirm soon...
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Yeah,
I think that any 7.50x16 tire can fit on either the RR/Disco with a stock offset wheel and a wee bit of trimming to the rear quarter panels on Discos...
Will confirm soon...
I think that any 7.50x16 tire can fit on either the RR/Disco with a stock offset wheel and a wee bit of trimming to the rear quarter panels on Discos...
Will confirm soon...
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Who is online
Users browsing this forum: No registered users and 28 guests