Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Removing lower gear in transfer

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Removing lower gear in transfer

Post by DeWsE »

Just wondering if anyone knows how to remove the lower output gear from main shaft. IE what side? The flange side or the other?
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Posts: 160
Joined: Thu Feb 19, 2004 9:32 pm
Location: Nelligen via Batemans Bay

Post by nelligen »

yea it comes off from the flange end.
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

nelligen wrote:yea it comes off from the flange end.

Thanks I'll keep trying. I have only got a gear puller not a press do you think it will work?
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

i used a pull when i removed all of my gears from the shafts. but i can remember how tight they were, all i can say is that they all eventually came off. :shock:
Posts: 160
Joined: Thu Feb 19, 2004 9:32 pm
Location: Nelligen via Batemans Bay

Post by nelligen »

I had to set it up with the gear resting on a few wooden blocks then knock the shaft down with a hammer and an alloy dolly, it came off easy with no damage, just take it easy
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

Thanks guys I ended up using the puller.
Just keep cranking till I had the big bang effect and all was good.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest