Hub diameters and f100/f150 rims

Post by **nicbeer** » Thu Aug 12, 2004 1:16 pm

Hey all
Going down to look at some rims toomorrow. Is there a difference between the sierras in regards to hub diameter?

From what I know, the jeep rims are sometimes different hub sizes but all the f150/f100 rims are the same and bolt straight on, without any grinding.

Is this correct. as the seller is thinking that the sizes are different from the zooks.

cheers

Nic

Post by **Badooky** » Thu Aug 12, 2004 1:24 pm

no
not all f100 rims are the same
f100 standard rims (6") have to small a center to fit over the lip on zook hubs
f100 sunrasia types (7"+) fit
f150 i believe are 6 stud (i may be wrong)
cj jeep rims fit (5 on 5.5??)
tj jeep rims dont (5 on 5 or 4.5 i think??)

i still have two sets in the for sale section that i know fit (one set of 4, on set of 5 all 15x7s)

Post by **nicbeer** » Thu Aug 12, 2004 1:32 pm

Sweet, thanks brett.

Any chance anyone has the diamater in mm for these. Mostly the F100 7" and the cj.

cheers

Post by **bigsteve** » Thu Aug 12, 2004 2:32 pm

F150 should be the same, the only difference I have seen are the already mention f100 6 inchers.

Post by **christover1** » Thu Aug 12, 2004 3:12 pm

bigsteve wrote:F150 should be the same, the only difference I have seen are the already mention f100 6 inchers.

the f250 is definately 6 stud, big ugly truck looking rims...not sure of the the f150....but there is a difference between 2wd and 4wd f100...I think its the 2wd with the smaller hub hole (no front hubs to stick out maybe) christover

Post by **Badooky** » Thu Aug 12, 2004 4:23 pm

i think f150 is six stud and f250 and f350 are 8 stud
probably right on the f100 2wd and 4wd

Post by **85zook** » Thu Aug 12, 2004 7:11 pm

Any chance anyone has the diamater in mm for these. Mostly the F100 7" and the cj.

im sure you can work out what 15 inches is in mm!!

Post by **nicbeer** » Thu Aug 12, 2004 7:29 pm

the hub not the wheel.

cheers

Post by **nicbeer** » Thu Aug 12, 2004 7:50 pm

Can someone please measure they spare 15x7 rim for me.

I have measurements(sp) of 85mm dia of hub hole and 85 between holes. This is from the seller.

The pic below should help I think.

cheers all.

Post by **nicbeer** » Thu Aug 12, 2004 7:53 pm

I will try again as that is not the image I posted.

Hmmmm, I think the server has issues with pic linking if it the same name.

cheers

Post by **Badooky** » Thu Aug 12, 2004 9:08 pm

mine are about 107mm in the hub opening and ~85mm stud to stud

Post by **nicbeer** » Fri Aug 13, 2004 6:59 pm

Just some information for you all.

I went out and checked some 15x7 f100 rims out and there have a smaller hub hole. About 85mm.

They were same offset and hole spacing as zook as well.
These were off a 79' f100 4wd.

Just letting ya all know.

Outer Limits 4x4 Board

Hub diameters and f100/f150 rims

Hub diameters and f100/f150 rims

Who is online