Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I've got my chassis stripped and on stands and was playing with a few ideas tonight. I have got the front axle position sorted but am not quite sure where to place the rear axle.
I wanted to put my battery and a spare under the tray but if i cut the chassis short like i wanted to both wont fit. I could leave the battery under the bonnet or leave the chassis long. But to get the departure angle i want i'd have to move the axle back. Wheelbase for the first setup is about 93" and if i keep the chassis long and move the axle it stretches it out to about 101". BUT if i do this my rampover (which is already not spectacular) will go to sh1t. I'll be running 32s with about 2" of lift and the drivetrain will be tucked above the bottom of the chassis rails.
After looking and thinking i reckon the go is to cut the chassis back, keep the 93" wheelbase and put the battery under the bonnet. Or get 37s
use one of the oddyessy batteries they are powerful and nice and small and mount it under your dashboard thats where mone will be going once i tube clip the front
