Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Clicky Clutch

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 2862
Joined: Mon Oct 06, 2003 1:17 pm
Location: Gympie

Clicky Clutch

Post by Kell »

After my big drive yesterday, I took the car out of 4x4 and now everytime I push the clutch in it clicks :? Does anyone know what it could be? I have got in under the steering wheel and had a bit of a squiz but nothing :?
Kell & Adam
80 Series Turbo Diesel Cruiser
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

Can you pinpoint where the click is coming from? - under the car or in the footwell. The return spring for the clutch lever in the footwell might be the cause. Do you have a cable or hydraulic clutch? Hydraulic clutch will have a small resevoir as well as the brake fluid resevoir in the engine bay.

Always look for the simple things first.
Built, not bought.
Posts: 4323
Joined: Wed Dec 11, 2002 8:42 am
Location: Gold Coast, Queensland

Post by HeathGQ »

Feroza's are cable clutch.
Heath & Melissa - 93 GQ LWB.
Posts: 269
Joined: Tue May 25, 2004 5:37 pm
Location: Adelaide

Post by crowey »

Sounds like what us backyard mechanics call 'clicky clutch'!!!
Its where the clutch goes click.....click!!

Sorry i shouldnt really be on here posting useless crap whilst intoxicated!!
Sorry Kell can't help ya!
[quote="Dangerous Dave"] Toyhatsu, Will you marry me and have my babies?! [/quote]
Posts: 4323
Joined: Wed Dec 11, 2002 8:42 am
Location: Gold Coast, Queensland

Post by HeathGQ »

good one crowey.

I would say, without looking at it, it could be the connection of the cable to the clutch fork mechanism being affected by water / mud (thats good). The other possibility is you got water and muck into the clutch plate and its making the bearing 'dirty'. (thats bad).
Heath & Melissa - 93 GQ LWB.
Posts: 669
Joined: Wed Sep 17, 2003 11:29 am
Location: Sydney

Post by Croz »

I had exactly the same thing for ages, after a drive where i was in a fair bit of water for a while and I think it washed out all the lubricant in the clutch.

I lubed every bit i could access both inside the cabin and out, but in the end I am pretty sure the the noise was from the swingarm that is on the side of the gearbox bellhousing and I couldnt get into it...

I put up with it for about six months and then it went away. Maybe something finally broke off... :D
On boooooost!!
Posts: 2862
Joined: Mon Oct 06, 2003 1:17 pm
Location: Gympie

Post by Kell »

Well I WD40 it and it has gone away now....thank goodness

Now I just have to work out how to reposition my back bumper from the weekend and I'll be set :oops: :D

Thanks for the help guys
Kell & Adam
80 Series Turbo Diesel Cruiser
Posts: 576
Joined: Wed Jun 02, 2004 8:17 pm
Location: Adelaide, South Aus

Post by Dangerous Dave »

The best way to reposition your rear bumper is to rip it off and make a new one because its only going to be a matter of time before you twist it and snap all the mounts as i did.

my 2c

DAVE :roll:
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests