Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Mq air filter cracked

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 44
Joined: Wed Nov 20, 2002 7:10 pm
Location: Brisbane

Mq air filter cracked

Post by lyall »

i've cracked my air-filter casing on my mq sd33. The filter that sits on top of the engine block. its now got a nice size hole in it. both cracks have happened at the front and rear mounts and mud sometimes gets in their, which ain't good.

Has anyone had this problem before?

I have been to the wreckers to try and get a second hand one but they all had cracks in them. (to much power in the old diesel)

Is their a simple way to repair it? or does it need to be replaced? Is their anyone who sells them other than nissan?

One thing i have seen at the wreckers is one guy had gotten rid of the filter and justed used the cannister filter and had a pipe going from that filter to the engine. is that safe not having 2 filters, im sure their are 2 filters for a reason.

Any suggestions are appreciated

Thanks

Lyall
Wanted: MQ ute body
Top
Posts: 44
Joined: Wed Nov 20, 2002 7:10 pm
Location: Brisbane

Post by lyall »

i went to nissan today and they have stopped making the park so im going to trying racin tape for now, unless some one has a better idea
Wanted: MQ ute body
Top
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

A friend of mine only used the round canister filter after puting an intercooler in place of the big cleaner. The small canister doesnt work effectively enough on its own and dust still gets in. He ended up snaping the shaft between the two fans in the turbo, cost him a new turbo and an engine rebuild.
Top
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Post by Juzza »

A friend ay Drafty, sounds a bit sus!!! :finger:
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Top
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

Juzza wrote:A friend ay Drafty, sounds a bit sus!!! :finger:


Dont get technical now Juzza , the main thing is to learn from other peoples mistakes. No matter who they are. :lol:
Top
Posts: 369
Joined: Wed Nov 27, 2002 12:28 am
Location: Toowoomba.Qld

Post by ShortyMQ »

would it be possible to weld/braze some light steel over the crack?
this would cover the crack as well as strengthen the area.it might work :)
Top
Posts: 44
Joined: Wed Nov 20, 2002 7:10 pm
Location: Brisbane

Post by lyall »

yeah i might have to give the welding a go, for now i went nuts with racing tape which held up on the weekend.

thanks
lyall
Wanted: MQ ute body
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest