Just finnished the new front BB and started work on the sliders and the rear Bar.
What do ya think ??
I am happy with it $50 in steel and 4 hours work
http://photos.ausjeepoffroad.com/detail ... age_id=230
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
New Front BB
Moderator: GUtripper
Na mate it has always been a 258 5 speed .
They are not spose to have the lights in the center section as the ADR's state they should be at the extremitities of the car. Any that are fitted to the grill would have been moved there. My covers are steel not plastic.
did not know they had plastic covers at all ??
They are not spose to have the lights in the center section as the ADR's state they should be at the extremitities of the car. Any that are fitted to the grill would have been moved there. My covers are steel not plastic.
did not know they had plastic covers at all ??
fair enough Cjer
All the 6 cyl ones I have seen have had the park lamps in there and the ones on the fender for the adr part
Mine are plastic covers that fit screw into the mounts for the lights
I have thought about getting the bessels and using those little hella 100 watt lamps as a set of spotties mounted in there but never got around to it. They are a perfect fit I just need the besils to hold them in
Mascot only sell the mountings with the lights
All the 6 cyl ones I have seen have had the park lamps in there and the ones on the fender for the adr part
Mine are plastic covers that fit screw into the mounts for the lights
I have thought about getting the bessels and using those little hella 100 watt lamps as a set of spotties mounted in there but never got around to it. They are a perfect fit I just need the besils to hold them in
Mascot only sell the mountings with the lights
Good idea with the spot lights in there. not much can hit them on the trail tucked up that far 
i just checked and my covers are plastic too :( dont know why i thought they were steel
one of the best things about Jeeps is that the cops dont know what they should have on them and what they should not :evil:
i just checked and my covers are plastic too :( dont know why i thought they were steel
one of the best things about Jeeps is that the cops dont know what they should have on them and what they should not :evil:
Who is online
Users browsing this forum: No registered users and 0 guests