Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tie rod in front of diff for RR

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 329
Joined: Thu Nov 07, 2002 5:24 pm
Location: Brisbane

tie rod in front of diff for RR

Post by derangedrover »

Anyone done this?
Can you use series knukles or perhaps the RH knuckle off a LHD RR?
Thinking this will:
1. let me use LP toy third in front
2. get tie rod higher than bottom of axle tubes

Any thoughts?

Cheers
Daryl
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

When mickrangie and i were helping landyman put toy 3rds into his rangie we thought about this and other solutions. Best bet is to use an 80 series toy hp in front which is the same as a hilux, then track rod clearance is not an issue- panhard rod would cause issues if placed in front also.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Post by Slunnie »

Will the Toy HP allow more room to move the track rod up over the rover. After a good lift (from axle rotation) it doesn't need to come up all that much.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Slunnie, as you tilt the axle forward both center and track rod move together, so as long as you have clearance betwen the radius arms and track rod it should be ok.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests