Tried using just about everything in the tool box short of the gas axe.
Manual says use a chain ratchet to hold the sprocket in place when you crack the nut but that didn't work either
Is the bolt usually this tight or what am I doing wrong
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Crankshaft seal on G16B
Crankshaft seal on G16B
Anyone know of a way to get the timing belt sprocket off of the crankshaft.
Tried using just about everything in the tool box short of the gas axe.
Manual says use a chain ratchet to hold the sprocket in place when you crack the nut but that didn't work either
Is the bolt usually this tight or what am I doing wrong
Tried using just about everything in the tool box short of the gas axe.
Manual says use a chain ratchet to hold the sprocket in place when you crack the nut but that didn't work either
Is the bolt usually this tight or what am I doing wrong
[quote="barnsey"]smoked Elle McPherson, even though I didn't inhale[/quote]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=765579&highlight=#765579/]Roadrunners Hilux[/url]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=765579&highlight=#765579/]Roadrunners Hilux[/url]
use a breaker bar that is long enough to reach ur chassis but be carefull doin this, position the bar with socket attached , and bar hrd up against the chassis jump in the rooster pit and give her a crank , make sure u take ur plug leads off and make sure u got the bar ont he propper side so wen u crank it loosens the bolt instead of tightens 
Umm,
Luckily I don't have a breaker bar long enough !
Although if my new chain ratchet doesn't work I'll give it a go with a bit of tube over my small breaker bar for length.
I mean, what could possibly go wrong
Thanks Bazooked
[quote="barnsey"]smoked Elle McPherson, even though I didn't inhale[/quote]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=765579&highlight=#765579/]Roadrunners Hilux[/url]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?p=765579&highlight=#765579/]Roadrunners Hilux[/url]
LOL Who is online
Users browsing this forum: No registered users and 1 guest