Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NEW PRODUCT

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 189
Joined: Wed Sep 08, 2004 8:27 pm
Location: GYMPIE QLD

NEW PRODUCT

Post by rock hopper »

If i was to go out and start making l/cruiser diff centre housing that
lifts up the pinion shaft .
approx 3 inches
how many of you out there would be interested in using this product .
help me , so i can help you.
L.C. AUTOMOTIVE PH:0754827077
4x4 PARTS + ACCESSORIES
TYRE WHEELS & RADIATORS - A/C
1 DuRIETZ COURT GYMPIE 4570
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Depending on price i know of three comp buggies that would be interested in running this set up. And they are all in SE/QLD.
Top
Posts: 189
Joined: Wed Sep 08, 2004 8:27 pm
Location: GYMPIE QLD

Post by rock hopper »

I WON'T know the price for a week or so .
is it ok if i e-mail you.

can you e-mail : tuff4by@dodo.com.au
L.C. AUTOMOTIVE PH:0754827077
4x4 PARTS + ACCESSORIES
TYRE WHEELS & RADIATORS - A/C
1 DuRIETZ COURT GYMPIE 4570
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

rock hopper wrote:I WON'T know the price for a week or so .
is it ok if i e-mail you.

can you e-mail : tuff4by@dodo.com.au


Yes Emailing me will be fine.

Wont the pinion gear also need to be re-designed if it is to be lifted? As it drives on a different angle top the crownwheel if lifted.
Top
Posts: 137
Joined: Wed Jun 09, 2004 9:21 am
Location: Melbourne - Eastern Burbs.

Contact:
Contact LilBlkDuck

Post by LilBlkDuck »

lifts up the pinion shaft . approx 3 inches

:?: So that the rear diff becomes a high pinion like the front? :?:
Lifted, locked, loaded, reduced, rolled, and rowed
FZJ80, 1FZ-FE, A442F, 37's & 5.29's.
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Re: NEW PRODUCT

Post by dumbdunce »

rock hopper wrote:If i was to go out and start making l/cruiser diff centre housing that
lifts up the pinion shaft .
approx 3 inches
how many of you out there would be interested in using this product .
help me , so i can help you.


isn't that exactly what a factory high pinion diff does?
Free air locker to the first 20 callers!
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

IMO a very useful product would be a diff center with a 100% stronger pinion shaft. This is the reason why many switch to Dana 60 diffs in the States.

Dave
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

beanz2 wrote:IMO a very useful product would be a diff center with a 100% stronger pinion shaft. This is the reason why many switch to Dana 60 diffs in the States.

Dave


the only couple of times I've seen pinion shafts shear is when axle wrap, on unrestrained leaf spring vehicles, binds the uni joint. otherwise they tend to tear teeth off the gears, which is hardly unique to toyota. Danas are cheap and plentiful and have huge aftermarket support in the US, which makes them a logical choice.
Free air locker to the first 20 callers!
Top
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Contact:
Contact bubs

Post by bubs »

dumbdunce wrote:
beanz2 wrote:IMO a very useful product would be a diff center with a 100% stronger pinion shaft. This is the reason why many switch to Dana 60 diffs in the States.

Dave


the only couple of times I've seen pinion shafts shear is when axle wrap, on unrestrained leaf spring vehicles, binds the uni joint. otherwise they tend to tear teeth off the gears, which is hardly unique to toyota. Danas are cheap and plentiful and have huge aftermarket support in the US, which makes them a logical choice.


you and your mates arn;t driving hard enough :lol:
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Top
Posts: 615
Joined: Thu Oct 23, 2003 12:37 pm
Location: Brisbane, QLD.. Posts: Too Many.

Post by Meldge »

bubs wrote:
dumbdunce wrote:
beanz2 wrote:IMO a very useful product would be a diff center with a 100% stronger pinion shaft. This is the reason why many switch to Dana 60 diffs in the States.

Dave


the only couple of times I've seen pinion shafts shear is when axle wrap, on unrestrained leaf spring vehicles, binds the uni joint. otherwise they tend to tear teeth off the gears, which is hardly unique to toyota. Danas are cheap and plentiful and have huge aftermarket support in the US, which makes them a logical choice.


you and your mates arn;t driving hard enough :lol:



Nice call BUBS... :lol:
Meldge...

86' Landcruiser - MWB Soft Top
Kustom, Kustom and more Kustom to Kome,
Store bought is not as fun...

[quote="Meldge"]Not too long, not to short, it's Middy - It's Just right... :armsup:[/quote]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 43 guests