Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
colour(s) and design, how to paint?
colour(s) and design, how to paint?
well i rolled my zook some weeks ago. it's dark blue ATM but when i get me new windscreen fame and targa bar they'll need to be painted. and i was thinking i might change the colour of the whole car at the same time. so here a few ideas i had;
give me your thoughts fellas
give me your thoughts fellas
Mark.
The white night rust guard paint I used for my spray was unreal
It comes in about 16 colours, you can get all colours in 1lt tins, some in 4ltrs.
At 19.99 a tin it cost me $60 to do the whole car and 2 sets of doors.
Its available at any bunnings and you can get matching colours off the shelf in rattle cans for touch ups.
It comes in about 16 colours, you can get all colours in 1lt tins, some in 4ltrs.
At 19.99 a tin it cost me $60 to do the whole car and 2 sets of doors.
Its available at any bunnings and you can get matching colours off the shelf in rattle cans for touch ups.
yeshemesh
how hard is spraying i did some of it at school but that was just painting a lawnmower
the only thing i worry about is getting runs could i just wipe the paint off were it run let it dry sand the area back and then start again etc
and can i use just a cheapy $30 spray gun from super cheap or should i convince my dad to get a really good quality one
the only thing i worry about is getting runs could i just wipe the paint off were it run let it dry sand the area back and then start again etc
and can i use just a cheapy $30 spray gun from super cheap or should i convince my dad to get a really good quality one
zukin4life wrote:how hard is spraying i did some of it at school but that was just painting a lawnmower
the only thing i worry about is getting runs could i just wipe the paint off were it run let it dry sand the area back and then start again etc
and can i use just a cheapy $30 spray gun from super cheap or should i convince my dad to get a really good quality one
grimbo used spray cans I think....so super cheap is fine, just remember it's not gonna look pro but who really cares. I have only washed my car three times in a year and a half
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
I used a couple of cans of Colourbond paint for my first colour change. It went easily, just gave the car a light sand and no problems. Current colour has used about 8 cans, been a bit harder as the orange didn't want to go over the green as well. Looked abit ripe in places.
As long as you clean the surface then sand it and clean it once more and work slow enough to guarantee an even finish it should be fine
As long as you clean the surface then sand it and clean it once more and work slow enough to guarantee an even finish it should be fine
Ransom note = demand + collage
[quote="grimbo"]I used a couple of cans of Colourbond paint for my first colour change. It went easily, just gave the car a light sand and no problems. Current colour has used about 8 cans, been a bit harder as the orange didn't want to go over the green as well. Looked abit ripe in places.
As long as you clean the surface then sand it and clean it once more and work slow enough to guarantee an even finish it should be fine
And thats where most paint jobs go ass up. If you go slow you won't have probs with running either
As long as you clean the surface then sand it and clean it once more and work slow enough to guarantee an even finish it should be fine
And thats where most paint jobs go ass up. If you go slow you won't have probs with running either
Last edited by DeWsE on Wed Sep 15, 2004 6:04 pm, edited 1 time in total.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
zukin4life wrote:how hard is spraying i did some of it at school but that was just painting a lawnmower
the only thing i worry about is getting runs could i just wipe the paint off were it run let it dry sand the area back and then start again etc
and can i use just a cheapy $30 spray gun from super cheap or should i convince my dad to get a really good quality one
Easy as dude Like said go slow but also do lots of lighter coats instead of a few heavy ones. More sanding sure but no runs
Karmic was good enough to host a couple of scanned books I did on spray pianting. They may Help
http://suzuki.agrajag.org/
Cheers
http://suzuki.agrajag.org/
Cheers
Who is online
Users browsing this forum: No registered users and 2 guests