Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

help needed whining noise

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 303
Joined: Tue Aug 05, 2003 11:27 am
Location: Castle Hill

help needed whining noise

Post by Monty »

I have a HJ60

THere is a noise coming either from the rear diff or the gearbox
i have a dertoit locker, just did the uni joint and tightened the pinion bearing however this noise is still there
i drove around today in front wheel drive, there wasnt the noise so its possible that the pinion bearing is gone, however there would be no strain on the rear output shaft of the gearbox would there without the tailshaft in so it wouldnt make the noise if this was the case?

has anyone any ideas what it could be?
Do not have sexual relations with your father's sister; she is your father's close relative
Leviticus 18:12
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

IS YOUR WIFE IN THE CAR WITH YOU WHEN YOU HEAR THIS WHINING NOISE?
This is not legal advice.
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

chimpboy wrote:IS YOUR WIFE IN THE CAR WITH YOU WHEN YOU HEAR THIS WHINING NOISE?


:rofl:

back to topic

Jack up the rear end.. put the diff on stands.

and with a smallish PVC pipe....

NOTE THIS IS A DANGEROUS PROCEDURE.. DO NOT GO UNDER THE CAR WHILST ITS ON. (thou heaps have done it :?)


have a mate turn the car on and put her in a higher gear and slowly turn the wheels,, .... with the PVC pipe,, put it on your ear and listen and move the pipe around the diff to identify the culprit, whether it be at the pumpkin.. (if its there) meaning a problem located in that area... and work it out from there. or bearings or shaft etc.

Otherwise take it into a shop and ask them for their professional opinion.
Top
Posts: 303
Joined: Tue Aug 05, 2003 11:27 am
Location: Castle Hill

Post by Monty »

Thanks gq for that may try it

any other ideas out there?
Do not have sexual relations with your father's sister; she is your father's close relative
Leviticus 18:12
Top
Posts: 615
Joined: Thu Oct 23, 2003 12:37 pm
Location: Brisbane, QLD.. Posts: Too Many.

Post by Meldge »

Could over tightening the Pinion Bearing give that sort of noise...
Not saying that is what you have done :lol: , but I was told to be very particular in how tight i did mine back up.


Meldge
Meldge...

86' Landcruiser - MWB Soft Top
Kustom, Kustom and more Kustom to Kome,
Store bought is not as fun...

[quote="Meldge"]Not too long, not to short, it's Middy - It's Just right... :armsup:[/quote]
Top
User avatar
DamTriton
God of Athiests
Posts: 8337
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

DID YOU LEAVE YOUR WIFE UNDER THE CAR THE LAST TIME YOU HAD IT UP ON STANDS????
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 303
Joined: Tue Aug 05, 2003 11:27 am
Location: Castle Hill

Post by Monty »

no my pinion bearing can be tighened up to the buggary because of a sleeve i think it is that isnt collapable cant remember

Dumbdunce was giving me a hand and told me about it


hmm no wife here so cant be that
Do not have sexual relations with your father's sister; she is your father's close relative
Leviticus 18:12
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest