Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Lights ???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 121
Joined: Mon Oct 21, 2002 9:00 pm
Location: Big Shed

Post by bobtail »

You can have all the lights you want It,s not going to make you drive any better :roll: :roll:
Posts: 31
Joined: Wed Nov 06, 2002 3:41 pm

Post by avgas454 »

Christ actually has a set on backorder... and as they say... none are so blind as those that cannot see... and nothing succeeds like a budgie without a beak...

Cheezy, Ive been thinking that the roll bar you described is a good idea...
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

A 6 point roll cage for the lights. :?: :idea: :wink:
Posts: 31
Joined: Wed Nov 06, 2002 3:41 pm

Post by avgas454 »

... you know it was suggested that in addition to the 3 year warranty we should put 'Cheezy Proven' on the packaging...
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

CJer wrote:Sorry Tonka

I picked them up last night from Pete's place :) :) :)


dude, whats the go there?

hmph!!

:?
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

ruff, i went on a night run about 2 months back (early september) with a bloke i know in a maverick (he likes to think it's a patrol), it maverick was lifted a bit, runnin 33inch bfg mt's and had spotties across the roof.

the patrol that i was talking about with the hid lights is a gu ute with an aluminium tray that had been bobbed and the back corners were angled, had twin lockers (i think) and i'm pretty sure he was runnin 36in? simex's
Posts: 384
Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD

Post by CJer »

Tonka
It took you a while ;)

I dont have them :)
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Probarbly Kym Bolton, Outback challenge dude.

Expensive shait!

Anyway why does anyone need to see 3 km down the track, when your CRAWLING over a rock you only need to see a couple of feet in front.
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

CJer wrote:Tonka
It took you a while ;)

I dont have them :)


Now Im lost.

Im getting private messages saying that you had bought the lights and was I mad and stuff cause I asked for em first....

what the?

................................... :?: .........................................
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Posts: 31
Joined: Wed Nov 06, 2002 3:41 pm

Post by avgas454 »

Why does anyone need to see 3km down the track?...
Why does anybody need 500hp?
Why does anyone need 2 feet of suspension travel?
'cos you can
It's the lunacy in life that keeps it interesting :)
Posts: 384
Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD

Post by CJer »

Tonka i was pulling ya leg i dont have the lights

yes i did send a email to Pete but that was before you posted about the lights


you can have them
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Yes but 500 hp and 2 feet of travel add somewhat to the perfomance of the car.

I know we all do it for fun, but some of these lights the guys are talking about cost over a couple of grand.

I'm sure that could be used to buy a bigger or better set of tyres, or crawler gears or dana 60's or if you want to spend you money on something really important, i know of some Rockwells that will fit straight under MY rig. :lol:

But i suppose spotties on the roof do look pretty cool :)
Posts: 31
Joined: Wed Nov 06, 2002 3:41 pm

POS Agreed!

Post by avgas454 »

POS, I didn't intend to have a go at your point of view, sorry if that's how it came across. Accept a virtual shout on the bar from me. Next round is yours, thirsty work here...HOT HOT HOT!
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

Got some 100w IPF spoties which are ok but there getting the arse for a couple of lightforce spoties soon...

This is post no 1 *WOOHOO*
Posts: 105
Joined: Sun Jul 18, 2004 9:42 pm
Location: Sydney

Post by ROD666 »

IPF HIR's, big bright & not prone to yellowing like some other brands :armsup: :armsup: :cool:
HOO ROO ROD

105 TDi Sydney

IT'S A FINE LINE BETWEEN CLEVER & STUPID

old age & cunning will over come youth & exuberance
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

http://www.4wdlinks.com.au/gallery/ludacris

I have two bosch 100 watter's on the bullbar and they are brite as.
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne

Post by GUJohnno »

The Patrol came with IPF's, but not a big fan of them. Not that bright. Mate has them and they have cracked twice around the base.
I have replaced them with Hella Rallye 4000's from my old truck. Great light. Great spread beam, and a rock solid mounting system.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

i love my hella rallye 4000's! the spread beam does a fantastic job and the pencil lights up the cat eyes for close to a km ahead.. also got some aux hella comet 181's as well but the spread kinda floods them out..

its all good tho when your doin night runs at ormeau with a farm gate full of lights!
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

Anyway why does anyone need to see 3 km down the track, when your CRAWLING over a rock you only need to see a couple of feet in front.


Yea, i'm just running stocko sealed beams - they are cheap and won't get water in them, and a set of cibie oscar spread beams, they give me a wide, even field of vision and ive still got plenty of light to have an idea of whats in front of me - enough room to stop at speed.
Ive ran spotters before and they were good but i'd tend to focus on the bright spots in the distance and not scan the sides of the road as much, also the glare off of signs pissed me off...
I don't mind the lightforces but didn't want someting hanging forward of my bar as i'd stuff them up.
There are no stupid questions, but there are a LOT of inquisitive idiots
Posts: 71
Joined: Wed Jan 01, 2003 9:38 am
Location: Hervey Bay

Post by chopper »

We got lightforce 170s on the Jeep, and they are okay...


But have Hella 4000s on the Troopy and they are simply the best lights that I have ever used, they may not be as "bright" as Lightforce 240s (nor look as stupid ;) ) but the quality of the light is shmicko.


I regret putting Lightforce on the Jeep, should have bout another set of Hellas. :roll:
88 TD Troopy, locked, lifted and plugged.

97 TDi Jeep Cherokee, (almost) bog standard
Posts: 436
Joined: Sun Jun 13, 2004 3:02 pm
Location: Building true offroad trailers and campers

Post by dieseldude »

I have ralleye 1000's.

They are pretty good. I've used my mates lightforce 240's with the same wiring etc and reckon they were no better.........and they vibrated like a sl_t when on corrugations!

Going to upgrade to either ralleye 2000's or 4000's

Anyone know what those Hella Hypolux spotties go like? I think they'd be ok cause I understand it's just a different casing with an already existing lense.
Droughtmaster Offroad Trailers and Campers

Offroad Camper MkI - Build up:
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=106712
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

90/130 lights, and 2x240 lightforce, you dont need anything else.
Posts: 75
Joined: Fri Dec 03, 2004 1:31 am
Location: Seymour, Vic

Post by GoPies »

I've got a set of LightForce 240 Blitz on the 80 series and they are fantastic, set them to wide angle or spot, your choice or anything inbetween. The only problem is when you go to low beam, it's like you're driving in the dark! They are good.

1 concept that needs attention by manufacturers is the theft option. Too many of these are getting pinched and they need to come out with a locking device to stop the little boys doing five finger discounts. They won't stop the pros but they are a real minority, just need to stop the boy with a shifter and pliers.
96 Landcruiser

"It's all good fun until someone loses an eye"
Posts: 1732
Joined: Sun Jan 19, 2003 6:12 am
Location: Roof, side, end, sometimes wheels

Post by ljxtreem »

I got headlights :lol:
Dont need more shit to smash off, when i roll end over end :D

Though i put 2 IPF spreads on the front of my girlfreinds zook,
they are good enough for a maller :D



Mock
My photographic Art http://www.redbubble.com/people/ljxtreem

www.dirtcomp.com.au

Sierrajim wrote:
So hurry up, come back, buy a Lada (can't believe i just said that) and we'll go wheelin'.
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

GoPies wrote:1 concept that needs attention by manufacturers is the theft option. Too many of these are getting pinched and they need to come out with a locking device to stop the little boys doing five finger discounts. They won't stop the pros but they are a real minority, just need to stop the boy with a shifter and pliers.


What I have found works well is if you replace the mount bolts with longer ones then get a washer and weld a piece of tube onto it. That makes it so you need a deep socket to remove. Like you say most thieves will just have shifter or pliers.
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

Just put a down payment that would buy a house but I've got:

2x lightforce XGT's on winch bar
2x lightforce 240 blitz on roll bar
2x lightforce 170's on roll bar
and for people that piss me off from behind I've got a pair of lightforce 140's as reversing/work lights on roll bar facing backwards
And before you ask, yes I hate the dark. :D
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

toughnut wrote:Just put a down payment that would buy a house but I've got:

2x lightforce XGT's on winch bar
2x lightforce 240 blitz on roll bar
2x lightforce 170's on roll bar
and for people that piss me off from behind I've got a pair of lightforce 140's as reversing/work lights on roll bar facing backwards
And before you ask, yes I hate the dark. :D


The 170's will be a waste, you wont see them thru the other 4 lights. :roll:
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ausyota wrote:What I have found works well is if you replace the mount bolts with longer ones then get a washer and weld a piece of tube onto it. That makes it so you need a deep socket to remove. Like you say most thieves will just have shifter or pliers.
Paul.


GoPies wrote:1 concept that needs attention by manufacturers is the theft option.


Pauls Idea is a good one, and agree, they willusually only have a shifter.

But I think Lightforce now have some lock thing on their site.


Wheres AVGAS these days??
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

I have a pair of 8 inch Carerra housings with Hella headlight inserts and 80/150w lamps.

Yes, I have high & low beam on my spotlights, switchable with the headlights, good for short range bush trail work without blinding the guy in front.

And a pair of cheapo 50w reversing/camping lights.

Seeing HID is all the rage I trying to work out how to mounta 400w Mercury Vapour High bay lamp on the roof rack, running off the inverter :D
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

The 170's didn't cost me anything and they look good. I'm angling them out for tight tracks. The XGT's on the winch bar will be for normal nightly driving cause I've got 2 trays. One for everyday driving/touring and one for comps. :twisted:
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Post Reply

Who is online

Users browsing this forum: No registered users and 126 guests