Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HOW HARD IS IT TO INSTALL A BODY LIFT?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

bent the gear shifter if nessecary in the vice :D

with the transfer i dont think ou will need to bend it.

with my 3 inch body i can shift into 4 low but it wants to pop out due to the rubber boot

so all i do is remove the 4 screws when using 4 low :D
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Contact:
Contact built4thrashing

Post by built4thrashing »

have unbolted the body and jacked it up off the chasis. have noticed there are some other mounts that touch the body but are not bolted. there is rubber pad between them. do i need to put spacers in these positions?
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

no its not nessecary they are just rests
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

built4thrashing wrote:have unbolted the body and jacked it up off the chasis. have noticed there are some other mounts that touch the body but are not bolted. there is rubber pad between them. do i need to put spacers in these positions?


for these spots, i used RHS and glued it it with rubber on each side.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 99 guests