Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Defender panhard rod ?

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 194
Joined: Tue Dec 16, 2003 5:49 pm
Location: Brisbane

Defender panhard rod ?

Post by 110 TUFF »

Hi guys, just a question. it might sound stupid, on the front end of a defender will one wheel have more travle then the other ie, passengers more then drivers? is this to do with the panhard rod on the front being kept standard with my 3 inch lift? should my panhard rod be longer? if so anyone make a new stronger one to suit?

Drew.
MOVE OVER, HERE COMES ROVER!!!
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

whiteline in sydney make an adjustable panhard for defenders.
it comes with urethane bushings, best to piss these off straight away and put original back in.(rubber)
looks very snazzy in a passivated finish but may rub/knock on thr front diff. guard.
david
Posts: 194
Joined: Tue Dec 16, 2003 5:49 pm
Location: Brisbane

Post by 110 TUFF »

thanks david, whats the advantage of using a longer pamhard rod? will this help my truck flex better? will it fix the uneven droop situation i have on the front now?

Drew
MOVE OVER, HERE COMES ROVER!!!
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

the advantage of a longer or adjustable panhard rod is that when you lift the front end of a pootrol, land(fill)cruiser or mighty rover the axle becomes off centre, as in not aligning with the rear axle.
think of the panhard rod as it drops, it moves in an ark(off centre)
now if you spring lift your truck probably more than 3" then the front wont line up with the rear, as in the front axle will have moved to one side.
you wont be able to 4 wheel align the vehicle.
some people don't mind this problen.
i found my defender would twist/wander on its axis when i was riding on the top of corrugations, severe braking would produce the same result, so would slippery mud(acceleration and braking)
the car was efectively crabbing.
i got a mate to align the front and he did a 4 wheel alignment just to check, he told me about the difference.
mine was only lifted 2", but it has made a difference.
i had allready replaced most of the bushes, chassis and suspension as a matter of maintenance.
hope this makes sense, rick130 or bill(daddylonglegs) will probably post tonight, they are well experianced with suspension cycling.
david
Posts: 162
Joined: Mon Apr 14, 2003 12:23 am
Location: Canberra

Post by suzidisco »

does any one have a Phone number for whiteline in sydney
5" lift front locked looking for bigger tyres
Posts: 15
Joined: Fri Apr 02, 2004 5:12 am

Post by asafk »

what about 'bump steer' effect when changing the panhard length, while keeping the steering drag link the same?

asaf.
"scars are tattoos with better stories"
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

does any one have a Phone number for whiteline in sydney

http://www.whiteline.com.au/alignment.htm

"Google" is YOUR friend

Bazzle
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

the length difference would only be in the realm of 10-20mm.
don't think this would effect bumpsteer yet, or should i say has'nt effected it yet.
david
Posts: 705
Joined: Thu May 13, 2004 7:29 pm

Post by daddylonglegs »

LandRover Panhard rods/drag links in standard trim are more horizontal than Nissan/Toys etc, so a mild lift doesn't affect them that much.
Bill.
Posts: 194
Joined: Tue Dec 16, 2003 5:49 pm
Location: Brisbane

Post by 110 TUFF »

thanks everyone
Drew.
MOVE OVER, HERE COMES ROVER!!!
Posts: 110
Joined: Thu Oct 16, 2003 10:48 pm
Location: Stockholm, Sweden

Post by wilsby »

You adjust the drag link out when you install a longer/adjustable panhard to get the steering back on center, so shouldn't affect bump steer.
Rangerover 4.6 HSE '96
Still stockish, but with plans
Defender 110 CSW Td5 '01
Full exo cage, all MDE axles, on 9.00x16 Michelins
Post Reply

Who is online

Users browsing this forum: No registered users and 31 guests