Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1.3lt into 1lt maruti

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 263
Joined: Thu Mar 06, 2003 7:55 pm
Location: Bayswater

1.3lt into 1lt maruti

Post by Fathillbilly »

1.3 out of NT into a 1lt WT ute

has anyone done this?

what engine mounts?
did you make your own?

any help would be much appreciated

Stu
[quote="COOP"] By the way Mr engineering Guru maybe you better get another calculator or learn how to use it![/quote]
www.indurooffroad.com
44mm and 38mm Roll Cage Tube
Eibach Springs SAW Shocks
Top
Posts: 150
Joined: Wed Feb 18, 2004 8:17 pm
Location: Perth

Post by Badooky »

gday stu,
i put a 1.6 injected vit motor in my 95 maruti and yes it needed new
mounts on both sides. the passengers side was just a modified original
but the drivers was a total custom as it needed to be forward by about 3".
this is if you us a sierra gearbox using the standard maruti mounts
It's the one on the right, Dammit !!!
Top
Posts: 148
Joined: Tue Dec 03, 2002 9:03 am
Location: Blue Mountains, Sydney

Post by stephen »

I put a 1.3 in a 95 Maruty, had a donor WT chassis, cut the mount's of the chassis and rewelded them into the maruti in the same position, engineer did not have a problem with that and was real easy.
Top
Posts: 263
Joined: Thu Mar 06, 2003 7:55 pm
Location: Bayswater

Post by Fathillbilly »

thanks guys

on the RHS we used a bit of 20x 75 flat 230mm long, CSK for the bolts to the chassis, and then drilled and tapped the 2 holes for the original Chassis to bush plate.

on the LHS we used a bit of 100x10 flat 130mm long, drilled the plate for the chassis holes and then set up the original chassis to bush plate and welded it to the plate.

the reason we used such thick plate was to get motor position right.

stu
[quote="COOP"] By the way Mr engineering Guru maybe you better get another calculator or learn how to use it![/quote]
www.indurooffroad.com
44mm and 38mm Roll Cage Tube
Eibach Springs SAW Shocks
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

I CAN BUY THE SIERRA 1.3 MOUNTS THAT GO ONTO THE CHASSIS.

I MIGHT GET SOME IN AS THIS IS A QUESTION I GET ALL THE TIME...

AND IM STUFFED IF I KNOW HOW TO DO THIS NEATLY.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests