92 sierra 1.3ltr motor clean through out ,new thermostat,radiator ok.Now coming south along Stocko beach temp was 3 needle widths of the red and when accelerator pushed to keep going pinging like mad.Tyres at 12psi,using low range 3rd and 4th around 3000rpm to about 3800.Should i put thermo fan on to assist cooling cause im also running premium unleaded which has cured on road pinging timing 7deg new timing belt etcetc??This is just my missus fishing car but i dontreally want to do damage to the motor so any ideas???
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Heating up sierra
Heating up sierra
92 sierra 1.3ltr motor clean through out ,new thermostat,radiator ok.Now coming south along Stocko beach temp was 3 needle widths of the red and when accelerator pushed to keep going pinging like mad.Tyres at 12psi,using low range 3rd and 4th around 3000rpm to about 3800.Should i put thermo fan on to assist cooling cause im also running premium unleaded which has cured on road pinging timing 7deg new timing belt etcetc??This is just my missus fishing car but i dontreally want to do damage to the motor so any ideas???
I ment to say should i fit a thermo fan nott turn on.sorry bout that.Mates sierra runs abou 3/4 temp but he drives on Belmont beach which he says is not as soft as Stockton so i will decide what to do as this arvo missus and i are going up to Stocko fishing and its 35 deg at 1pm.So i willsee what happens.Thanks.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Where on stocko you running, i have driven stocko a bit, and grew up in belmont, and found that belmont south beach was a bit softer than stocko on the actual beach part, not the dunes. Last weekend my zook was a bit over half at the most playin in the dunes with STUMPED, REDZOOK and RB ZOOK.
Layto....
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Well i went up Stocko last night from 4.30 to 8pm and running up to Williamstown temp was 1/3 up from cold,then 10psi in tyres out and down the beach towards Sygna and temp gotjust over 1/2 so i will just find a thermo and whack it on and go from there.10 degrees timing and if you labour it it starts to ping but at 7 it seems ok so i will leave it there.
Thanks for input guys.
85zook wrote:timing should be at 10 deg BTDC
Thats factory spec isnt it .. I never had much lucl with any sierra motor at factory timing, gutless and would ping it's head off .. (Almost literally)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
How good condition is the cooling system ..
I would say you would be better off spening some $$ on the rad amking sure it is clean and flowing well.
I never had heating issues with min even on 35's with a 1.6 (unless the rad was full of mud)
I would say you would be better off spening some $$ on the rad amking sure it is clean and flowing well.
I never had heating issues with min even on 35's with a 1.6 (unless the rad was full of mud)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Reverse flushed,then some of that powder cleaner stuff and water was nearly drinkable.One thing i havent looked at is the heat range of the spark plugs fitted.Ill slowly get to the end of it as i only paid $1500 with 2nd hand donk with185 psi in the cyl good tyres 4 small rust holes in floor and a perfect rust free windscreen suround and cowl area.
I will get this small thing sorted,and its good to hear from people that have worked/tinkerd etc on Suzis to get some of their hard earned knowledge.Thanks
Who is online
Users browsing this forum: No registered users and 2 guests