Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Would it be considered bad if........

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 124
Joined: Fri Aug 01, 2003 11:48 am
Location: brisvegas

Contact:
Contact Gibbon TSAM

Would it be considered bad if........

Post by Gibbon TSAM »

you undo the drain plug on ther gearbox to drain the gear oil out and a single ball bearing falls out in the oil :shock:

first thought was gear bearings, but no other metal bits fell out so any ideas on what this bearing has come from.

oh well now i just have to figure out how to rebuild a gearbox ;)

any ideas where to get the stuff from in brissy?
if ya aint willing to damage it then you shouldn't own it
Top
Posts: 23
Joined: Thu May 08, 2003 8:11 pm
Location: singapore

Re:- Ball bearing..?

Post by zukiny »

Gibbon,
zukiny from Singapore.

Cud it be from your 4wd sensor ..? mine has a ball at the ''plunger'' side of the switch that rides on the shaft that carries the h4 & l4 gears.

Happy wheelin
Top
Posts: 124
Joined: Fri Aug 01, 2003 11:48 am
Location: brisvegas

Contact:
Contact Gibbon TSAM

Post by Gibbon TSAM »

nah its in the gearbox not the transfer case but i will keep that in mind in case it happens when i do the transfer case oil :D
if ya aint willing to damage it then you shouldn't own it
Top
Posts: 333
Joined: Thu Apr 24, 2003 3:10 pm
Location: Cairns, effenque

Post by mike »

Reverse switch is in the gearbox.
Could it be the same?
If it's already been thought of...
There has to be a better way...
Top
Posts: 124
Joined: Fri Aug 01, 2003 11:48 am
Location: brisvegas

Contact:
Contact Gibbon TSAM

Post by Gibbon TSAM »

dont know could be will have a look
if ya aint willing to damage it then you shouldn't own it
Top
Posts: 215
Joined: Sun Jul 18, 2004 2:34 pm
Location: Tassie, Australia

Contact:
Contact 85zook

Post by 85zook »

i doubt there would be ball bearings in the gearbox. they should all be roller bearings.
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

Might be the bearing from the selector if the gearbox is like the transfer case

Image
rest of site here
http://www.zukiworld.com/month_070102/f ... nstall.htm

HRZOOK
Top
Posts: 215
Joined: Sun Jul 18, 2004 2:34 pm
Location: Tassie, Australia

Contact:
Contact 85zook

Post by 85zook »

you work on your car with gloves on?? :?
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

85zook wrote:you work on your car with gloves on?? :?


so his hands arnt dirty for when he rips the top of it at nite

:finger: :finger:
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

pull out your reverse , 4th and 5th switches on the top front of your gear box and make sure the balls are still attached, or put the car in reverse if the lights (reverse) come on the switch is ok but check the other 2.
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Top
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Contact:
Contact Squik

Post by Squik »

Same thing happened to me, but be stuffed if I can remember exactly where we put it back in.... :roll: But I think it went back in through the same hole, but we had to lift the shifter to allow it to settle back into place. The boys were the ones fiddling with it, so I'm not quite sure.
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 5 guests