Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3" lift. whats needed

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

3" lift. whats needed

Post by Duff »

ive got a mate who wants to lift his shorty gq patrol on a real tight budget. i know 4" lift and he'll have vibration probs so was thinking 3". now would he only need shocks, springs, castor bushes and extended brake and diff lines. do ya recon he'll need to lenghten his panhards aswell or should it be right.

his aim is to put 33" tires on and hit some medium off road trails
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

wont need to do panhards.

He'll be right.

Wont need to do brake lines. Just unbolt the front brake line off the diff just in case and you'll be fine.

Diff breathers.. they'll need to be done anyway so reroute the breather lines to the firewall with a one way filter or a fuel filter with the exit pipe facing downards.

TOM
Posts: 20
Joined: Mon Jun 07, 2004 2:47 pm
Location: Central Coast

Post by markc_GQ »

I'd be careful trying to lift a shorty on a tight budget...
I gave that a go, and the 2" lift (tho it sat at about 3") caused (really) bad driveshaft vibrations, and cos i was (am? :?) on a tight budget, I had no money to spend to try to sort it out. Which adds up to having a set of lifted springs & shocks sitting in the shed...

Mebbe your mate already knows all that, but i just thought I'd share anyway :)

Of course, he could be luckier than i was and have no problems at all...

Mark
Posts: 221
Joined: Mon Sep 06, 2004 3:29 pm
Location: Sydney

Post by muzza_fattire »

Didn't have any real problem with my lift...
Only had to use springs and shocks.
The front brake line is held by a clip to the firewall (I think). If you undo the clip the brake line will stretch down and wont need extending.
Rear brake line wasn't a problem - maybe a little tight...
Diff breathers OK.
Panhard rod is borderline. The axle is noticably shifted about 1-2cm off centre but isn't a problem.
There was a bit of vibration afterwards, but I installed about 15mm of gearbox packers and it has stopped.
*****************
'88 GQ SWB TD42
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

Post by Duff »

forgot about the gearbox packers. there real cheap any ways. i just wanted the max lift without getting a new drive shaft. so looks like 3" is a goer. anyone got a set of 3" springs and shocks for sale?
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Post by Bingham »

may have 3 springs if i buy some new 5's on the weekend

keep in touch
bingham
2015 200 Series Gx TTD - ................ Fark 3L's -
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

i would play with heights of springs if your mate is willing to buy adjustable panhards look at the 4 inch first as i have 4 inch and only needed gearbox packers every patrol is different especially in shorty's i new a guy who needed to rotate his diff backwards and ended up paying shit loads
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

Post by Duff »

my bro and i have 4" lifted shorty and we both needed to get drive shafts, gearbox packers and my bro had to rotate his diff aswell, so hes not taking the chance. also he has no money to play with heights. guess i coud rip mine out and try it on his but thats too much work that i dont want to do
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest