Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

40 series Project

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 117
Joined: Thu Oct 09, 2003 2:20 pm

40 series Project

Post by mattklippert »

can anyone tell me if anyone running 80 series diffs with 60 rear spring all round??? or if the 80 series diffs will fit under a 40 series

and what do think would be the best motor and box to run
-commodore 5ltr and t700 and dual transfer cases
-1UZ-FE and a 80 series auto box

just something i'm think of Building :twisted: :twisted: :twisted:
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

You can come and put either one of those engine combos in my rig ;) :cool:

Thanks :D
Top
User avatar
DAZ
Posts: 1689
Joined: Sat Feb 22, 2003 7:40 pm
Location: Shepparton Vic

Post by DAZ »

I have 80 diffs on coils under my truck you can see it in members there use to be a heap of photos of build but there all gone now there is some finished photos and links to more there though hope it helps i would go EFI v8 auto any day
If you can not get there in a 4wd its not worth looking at
Top
Posts: 117
Joined: Thu Oct 09, 2003 2:20 pm

Post by mattklippert »

i'm thinking of go 1UZ-FE and a 80 series auto box :twisted: and i would like to go with 80 series diffs as well (but i dont think the diffs will fit and i dont want to make custom guards for it)

i know that 60 series diffs do fit and you dont have to make custom guards for them

but are the 60 series diffs up to the job of running front & rear diffs all the time :?:

any help on what diffs to run
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

2 differences in the 80 series and 60 series diffs, well 3. width (80 series diffs are wider than 60 series, and 60 series is wider than 40 series) to get 60 series diffs under a 40 i think you have to either outboard the springs, or notch the housing to seat the spring perch, as the pumpkin sits where the springs need to mount..

The CV's are bigger in 80 series diffs.

80 series diffs have a high pinion, 8 inch reverse cut ring gear, which some say is weaker.

i think well looked after 60 series axles could run full time. locking hubs were optional on early 40 series, so the diffs would always be spinning when moving
Spit my last breath
Top
Posts: 117
Joined: Thu Oct 09, 2003 2:20 pm

Post by mattklippert »

can anyone post some pic's of 60 series diffs and spring setups for me to take a look at
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

t

Post by DIRTY ROCK STAR »

mate you are obviously not too strapped for cash at the moment.

if you can do it, it will be a mean 40!!!!!!!

DO IT! DO IT!

have a look on shorty40s members, or Daz's too.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 151
Joined: Thu Dec 04, 2003 6:37 pm
Location: Springwood NSW

Post by Eddywelder »

mattklippert wrote:can anyone post some pic's of 60 series diffs and spring setups for me to take a look at


your welcome to have a look at my rig and how I have done it all...best thing I ever did
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 9 guests